Author Topic: Need specs for replacement volume control assembly (Rowe R-83 Disco 200) (Read 3615 times)

rockit62 · « **on:** November 20, 2008, 12:21:59 pm »

I have a Rowe R-83 Disco 200 JB and am looking for a replacement volume control (potentiometer) assembly. Does anyone have the specifications for this part? The part number in the repair manual is 2-01799-00. The numbers on the back of the pot are 3-06285-01 and R1378804. Radio Crack has a number of pots but I need the specs so I know what to purchase. Thanks.

Patrick

Kevin Mullins · « **Reply #1 on:** November 20, 2008, 12:31:28 pm »

Just measured mine and it is a 10K Ohm pot.

Ken Layton · « **Reply #2 on:** November 20, 2008, 03:51:07 pm »

I just replied in the other thread with both the genuine Rowe replacement and a Radio Shack replacement.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Need specs for replacement volume control assembly (Rowe R-83 Disco 200) (Read 3615 times)

rockit62

Need specs for replacement volume control assembly (Rowe R-83 Disco 200)

Kevin Mullins

Re: Need specs for replacement volume control assembly (Rowe R-83 Disco 200)

Ken Layton

Re: Need specs for replacement volume control assembly (Rowe R-83 Disco 200)