Author Topic: Cup Holders (Read 3905 times)

Visitor Q · « **on:** November 17, 2008, 02:27:15 pm »

I am considering cup holders for my cab once I get it.

Any pix or recommendations?

I did a search on here and saw the flip out ones as well as the ones Happs offers.

http://www.retroblast.com/20060821160/Misc/Arcade-Cabinet-Cup-Holders.php

http://www.happcontrols.com/amusement/acesor/27142200.htm

DeLuSioNal29 · « **Reply #1 on:** November 17, 2008, 06:43:18 pm »

I like the first one that folds away. However, both of them require that you put holes in the side of your cab. Are you sure you want to do this?

~ D

FrizzleFried · « **Reply #2 on:** November 17, 2008, 06:47:04 pm »

Just mount them to the walls at various places...

driph · « **Reply #3 on:** November 17, 2008, 07:12:03 pm »

I'm usually not a cupholder fan, but I went with 'em on the Neo mini. Just seemed to fit.

amerish · « **Reply #4 on:** November 17, 2008, 08:55:48 pm »

I have the same cup holders on mine! They can hold a 40 ounce beverage of the adult kind!!!

pinballwizard79 · « **Reply #5 on:** November 17, 2008, 10:44:03 pm »

Fold downs are my preference but unfortunately my cab wont accommodate them

.

LOL @ amerish............. As Lando says "Colt45, works every time".

severdhed · « **Reply #6 on:** November 18, 2008, 10:10:36 am »

i have fold down cup holders on my cabinet, i got them at walmart for $3 each. they work OK, they hold cans pretty well, no glasses though. I"m assuming glass bottles would work OK, but i don't drink (alcohol), so i cannot confirm that.

Loafmeister · « **Reply #7 on:** November 18, 2008, 12:03:22 pm »

I'll have to check Walmart. I have two "blind" spots on my CP that I think are perfect for either of these, basically my CP extended about 4 inches past the cab on either side, so the back of the CP is a perfect spot. I see the flip versions dimensions is 4", I'd just need to trim the t-molding a bit in that area. Interesting.

The flip cup holders look great but jeez, they look fragile, but it's very cool how they fold away and because of the location on my cab, most wouldn't even notice them unless they were in use.

Can anyone please tell me the footprint on the non-flip version? Thanks.

divemaster127 · « **Reply #8 on:** November 18, 2008, 12:47:51 pm »

I have 18 of the happ cup holders in stock if you need, just send a pm for a quote if you need
dm

jasonbar · « **Reply #9 on:** November 18, 2008, 02:14:34 pm »

Bicycle water bottle cages!!! http://forum.arcadecontrols.com/index.php?action=dlattach;topic=66908.0;attach=75556;image

They come various colors, they're easy to mount, they're rugged, there are a ton of designs out there & you can find a variety in any bike store...

(I've since moved mine from the side of the cabinet to the back face of the control panel.)

-J

ahofle · « **Reply #10 on:** November 18, 2008, 06:26:00 pm »

Quote from: Visitor Q on November 17, 2008, 02:27:15 pm

http://www.retroblast.com/20060821160/Misc/Arcade-Cabinet-Cup-Holders.php

I have these. They are nice because unlike the other cup holders, they can expand to hold highball and small cocktail glasses in addition to cans/bottles. Of course they also fold out of the way when you don't use them. My cabinet is also black, so they don't really stick out. There is nothing like grabbing a swig of beer in between levels of classic games.

Visitor Q · « **Reply #11 on:** November 18, 2008, 07:03:38 pm »

Quote from: driph on November 17, 2008, 07:12:03 pm

I'm usually not a cupholder fan, but I went with 'em on the Neo mini. Just seemed to fit.

Honestly I think these look great after seeing them install even more so than the fold downs which look kinda cheap. I do like that they fold down though...

40oz.! Damn, now that's awesome!

amerish... Could you post up some pix?

miles2912 · « **Reply #12 on:** November 18, 2008, 07:22:01 pm »

+1 for cup holders. They get a lot of use on my cab ...

Visitor Q · « **Reply #13 on:** November 19, 2008, 10:17:23 am »

Looking Good IMO!

Flake · « **Reply #14 on:** November 19, 2008, 11:40:26 am »

Just bought two of the happ cup holders from DM. Hopefully they will fit on the back end of my CP overhang facing the wall. I usually drink beer from frosty mugs so I needed the ones with the cutout for the mug handle.

Visitor Q · « **Reply #15 on:** November 19, 2008, 11:45:45 am »

Who is DM?

DeLuSioNal29 · « **Reply #16 on:** November 19, 2008, 12:24:20 pm »

Quote from: Visitor Q on November 19, 2008, 11:45:45 am

Who is DM?

Divemaster127

Visitor Q · « **Reply #17 on:** November 19, 2008, 01:13:45 pm »

Ok... Sent him a PM.

Thanks.

Loafmeister · « **Reply #18 on:** November 19, 2008, 01:50:49 pm »

I ordered two of the "flip cup holders" from an ebay supplier, should get them next week, will posts pics then.

Visitor Q · « **Reply #19 on:** November 19, 2008, 02:20:07 pm »

They look nice but they seem sorta flimsy, I am just going on pictures.

Teknique · « **Reply #20 on:** November 19, 2008, 02:41:23 pm »

You may not like as large a cp as mine but if you have the real estate on your board, inset cup holders work nice for me.

they sell them here:
http://pokerchest.com/cupholders.html

Visitor Q · « **Reply #21 on:** November 19, 2008, 03:14:48 pm »

That thing is like a freakin' car hood! Cripes!!

Flake · « **Reply #22 on:** November 19, 2008, 04:35:23 pm »

Quote from: Teknique on November 19, 2008, 02:41:23 pm

You may not like as large a cp as mine but if you have the real estate on your board, inset cup holders work nice for me.

they sell them here:
http://pokerchest.com/cupholders.html

Isnt that what pinballwizard was wanting to do with his cupholders? I think it looks great. I like big panels.

pinballwizard79 · « **Reply #23 on:** November 19, 2008, 08:40:34 pm »

Yeah Flake that's exactly what I was wanting to do but then my arcade was compared to a Mazda

Thats it, I am totally getting those things..............10 units for $25 on ebay including shipping so it looks like there will be some leftover ammo for my wall mount drink shelf.

Teknique I like the panel broseph!

YAY for huge arcades!!!!!!!

Visitor Q · « **Reply #24 on:** November 20, 2008, 12:08:13 pm »

Those tins cup, you can spit your ta-backy in there as well.

LOL!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news