Anyone need cam locks for your coin door or back door?

[dtechlogic]

I will take 4 for a neogeo MVS Cabinet. I need one for the coin door and the coin collector door and two for the top of the cabinet were the speaker are located. Let me know if those lock will work with it please

[Beretta]

question.. how do i measure to find out what size i need?

is it from nose to tail? or do you measure only the threaded part or what?

[2600]

What model lock?  C625? Will it come with a straight and offset cam?

It only comes with a straight cam.  I /think/ it's a C625.

Obviously it's up to you, but I wonder if it would be better or easier to just offer 7/8 locks and have them come with a straight and offset cam.  Then the user has the option of using it as a 7/8" lock or a 1 1/8" lock or even a 5/8" lock.  Also, you would only have to buy 1 size lock and it might be easier to stock or make your minimum purchase.  Thoughts?

[SirPeale]

What model lock?  C625? Will it come with a straight and offset cam?

It only comes with a straight cam.  I /think/ it's a C625.

Obviously it's up to you, but I wonder if it would be better or easier to just offer 7/8 locks and have them come with a straight and offset cam.  Then the user has the option of using it as a 7/8" lock or a 1 1/8" lock or even a 5/8" lock.  Also, you would only have to buy 1 size lock and it might be easier to stock or make your minimum purchase.  Thoughts?

That would involve getting the separate cams.  I can see if I can get the offsets, but the place I'm purchasing them from has assured me that regardless of length I can still get the quantity discount.

question.. how do i measure to find out what size i need?

is it from nose to tail? or do you measure only the threaded part or what?

You measure the threaded part, yes.  Over/Under doors, Coin Controls doors (like you'd find on a Williams Classic cab) take a 7/8" lock.  Midway doors (Pac-Man, Galaga, etc) take a 1 1/8".

I will take 4 for a neogeo MVS Cabinet. I need one for the coin door and the coin collector door and two for the top of the cabinet were the speaker are located. Let me know if those lock will work with it please

The coin doors are easy - 7/8" (over/under, correct?).  I believe the upper ones are 5/8", and I wouldn't replace them if you already have them.  Keep that key in your coin door.  I'm sure someone more knowledgeable than I about Neo Geo cabs will speak up...

[dtechlogic]

I don't have the key to them. I just obtain the cabinet less then a week and also the locks are busted on top part. i am going to unscrew them  today.

What model lock?  C625? Will it come with a straight and offset cam?

It only comes with a straight cam.  I /think/ it's a C625.

Obviously it's up to you, but I wonder if it would be better or easier to just offer 7/8 locks and have them come with a straight and offset cam.  Then the user has the option of using it as a 7/8" lock or a 1 1/8" lock or even a 5/8" lock.  Also, you would only have to buy 1 size lock and it might be easier to stock or make your minimum purchase.  Thoughts?

That would involve getting the separate cams.  I can see if I can get the offsets, but the place I'm purchasing them from has assured me that regardless of length I can still get the quantity discount.

question.. how do i measure to find out what size i need?

is it from nose to tail? or do you measure only the threaded part or what?

You measure the threaded part, yes.  Over/Under doors, Coin Controls doors (like you'd find on a Williams Classic cab) take a 7/8" lock.  Midway doors (Pac-Man, Galaga, etc) take a 1 1/8".

I will take 4 for a neogeo MVS Cabinet. I need one for the coin door and the coin collector door and two for the top of the cabinet were the speaker are located. Let me know if those lock will work with it please

The coin doors are easy - 7/8" (over/under, correct?).  I believe the upper ones are 5/8", and I wouldn't replace them if you already have them.  Keep that key in your coin door.  I'm sure someone more knowledgeable than I about Neo Geo cabs will speak up...

[SirPeale]

I don't have the key to them. I just obtain the cabinet less then a week and also the locks are busted on top part. i am going to unscrew them  today.

Measure them, they're measured by the threaded part.  I think they're 5/8".  I can see if I can get a couple of them while I'm @ it.

They also might be special because don't they have a lock bar or some kind of hasp?  It's been a while since I worked on a Neo Geo cab.

Pics are handy.

[MKFan4Life]

Could use (2) for my Gauntlet Legends cab.  Should be Wells-Gardner Part #891-0547-00 double D cam lock.  Over/Under two entry coin door.  Can't measure the size, 'cause it came with no locks at all installed!  Can't find the dimensions for this part # online either.  Would it be a 7/8" length?  Door thickness appears to be 3/4" and where it shuts, the frame is close to 1" thick.    What do you think? 

[SirPeale]

As I stated above, over/under doors take a 7/8" lock.  I've never seen one that has not, anyway.

[sayitaintjonas]

You can put me down for 12. One of my candy cabs needs 7 locks alone!

I'll get you all the sizes if this order goes through

[SirPeale]

I'll get you all the sizes if this order goes through

The order is going thru.  I need those sizes!

[sayitaintjonas]

Glad to hear it 
Will measure and get back to you tonight. Thanks!

[Sain]

You can mark me down for 2 - 7/8th

[SirPeale]

Thanks Sain.

I've had several people ask me about 5/8".  I'll find out. 

[Hoopz]

http://forum.arcadecontrols.com/index.php?topic=87353.0

 

[SirPeale]

http://forum.arcadecontrols.com/index.php?topic=87353.0

 

This isn't in BST.

[Hoopz]

http://forum.arcadecontrols.com/index.php?topic=87353.0

 

This isn't in BST.

PM a mod and they can move it for you to the appropriate section.   

[SirPeale]

http://forum.arcadecontrols.com/index.php?topic=87353.0

 

This isn't in BST.

PM a mod and they can move it for you to the appropriate section.   

[2600]

Any word on when you think you'll place the order?

[SirPeale]

Any word on when you think you'll place the order?

I'm thinking very soon.  I've had the number I needed for a while now, but people keep asking about them, so I've put it off.  Those numbers have dwindled now, so...

Anyone else?  Last chance.

[SirPeale]

The good news: I can get 5/8" locks.

The bad news: They won't have the same key as the 7/8" and the 1 1/8" ones.  But all the 5/8" will have the same key within themselves.

Also: no offset cams available.  Sorry.

So: consider this a GO.  I'll be contacting those interested shortly with a total.  Please pay promptly to not hold others up.

[MKFan4Life]

Sending you the payment for (2) 7/8" locks right now (for Gauntlet Legends over/under door set).  Thanks!
 

[SirPeale]

I have now PM'd everyone that contacted me either via PM or in this thread with a total and a Paypal address.  Even if you can't pay right away, please respond.

[SirPeale]

Nearly everyone has paid.  Order will be placed Monday.

[MKFan4Life]

Nearly everyone has paid.  Order will be placed Monday.

Thanks for the help. 

[SirPeale]

Received the locks yesterday.  I'll be boxing over the weekend.  I've got like 30 orders to fill, so it'll take me a while.

[2600]

Excellent.  Thanks for going through with this.

[SirPeale]

Despite my best intentions to get things packed up this past weekend, and every day since then, I've had one Real Life(tm) problem after another stack up.  However, today my assistant and I (my four year old) have been diligently packing up orders.  Those I've already gotten to have probably received a Paypal notification about it.  Those I haven't will be done shortly.

[Queeg]

Hello,

Just wondering if you still have enough locks for new orders. I only need 1 7/8" lock.

Any idea on shipping costs to Illinois?

Thanks

[SirPeale]

Check my store.

http://www.pealefamily.net/arcade/store/index.php?main_page=index&cPath=1

I'm afraid shipping isn't too pleasant though.

[Red 5]

Got mine today  .    Whohoo 

These are nice.

Thanks,

Jon

[saint]

Got mine - thanks!

[MKFan4Life]

I checked my mailbox this past Saturday, and someone by the name of "Peale" was kind enough to ship me some locks for my Gauntlet Legends game!  They fit and work perfectly... wow, how nice of this complete stranger.  Wonder how he knew I needed them?  Good job! 

[DashRendar]

I still need mine!   

[SirPeale]

I still need mine!   

Sorry about that - you slipped under the radar.  I dropped your lock in the mail today.