Where can i buy a .187 male wired to two female .187 almost like a "y" adaptor

[mrclean]

Looking to purchase 3x

.187 quick disconnect male, that branches off to two female .187's almost like a "y" adaptor so to speak. or really mini daisy chain.

the attached photo on the bottom is from jammaboards.com, i basically need the oposite of that, but with longer wires maybe 2 ft between each female

[SirPeale]

Just curious why?

[mrclean]

because of this:
 

http://forum.arcadecontrols.com/index.php?topic=86342.0

or in short.. for my left handed friends

[SirPeale]

I gotcha.  Why don't you just rewire it for about a buck?  Remove the old disconnects, strip back, add wire, crimp in?

[mrclean]

i really don't want to do it to begin with but this way i won't be messing with the jamma harness etc i feel like it should be working without having to do this maybe not though i have no idea i have a feeling that line c002 is most likely for "cocktail" mode

[SirPeale]

You're not messing with the JAMMA harness, you're just splitting the input.  It's dead easy, and you can be up and running in about 1/2 an hour if you're slow.

[grueinthebox]

You can most likely buy the wire, connectors and a pair of crimpers locally for less than the cost of shipping pre-made ones from elsewhere.  Head to Fry's or your local equivalent.

[ChadTower]

And if you don't know how this is a damn fine way to learn.  Low cost, no danger of breaking anything.  If you want to have arcade games this is something you need the ability to do.

[CheffoJeffo]

Yep -- either rewire those three buttons (best recommendation) or make the adaptors yourself.

[Todd H]

What these guys said. Buy yourself a crimper and DIY. It's a skill you'll probably need sometime in the future.