Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: u360 1 button not working  (Read 1183 times)

0 Members and 1 Guest are viewing this topic.

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 822
  • Last login:January 25, 2024, 10:34:36 am
  • Akira!
    • ModMyBox
u360 1 button not working
« on: October 30, 2008, 01:54:51 pm »
i hooked up 2 u360 with wireing harnass
all buttons work for player 1
and for ID2 player 2 all buttons work exept button 5
the green wire.

i checked the microswitch and replaced it, and also the green wire is good till the u360 motherboard pin, i tested with a multimeter.

what could be wrong?
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: u360 1 button not working
« Reply #1 on: October 30, 2008, 02:04:35 pm »
Have you touched the wires together without running through a switch? Does it show the button working?
Logged

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 822
  • Last login:January 25, 2024, 10:34:36 am
  • Akira!
    • ModMyBox
Re: u360 1 button not working
« Reply #2 on: October 30, 2008, 02:38:55 pm »
tried that

connected wires on the mainboard from green point to gnd
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: u360 1 button not working
« Reply #3 on: October 30, 2008, 02:41:15 pm »
and did it register at all?
Logged

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 822
  • Last login:January 25, 2024, 10:34:36 am
  • Akira!
    • ModMyBox
Re: u360 1 button not working
« Reply #4 on: October 30, 2008, 02:45:16 pm »
nope, dead

i flashed from 2.3 to 2.4

still same problem

i think its broken :(

how is this possible..
Logged

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 822
  • Last login:January 25, 2024, 10:34:36 am
  • Akira!
    • ModMyBox
Re: u360 1 button not working
« Reply #5 on: October 30, 2008, 02:50:12 pm »
ok the track on the pcboard is broken. its not connected to the u360 IC

so no connection from u360 IC to pin green wire.

good thing i can solder this :)
Logged

Martijn

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 822
  • Last login:January 25, 2024, 10:34:36 am
  • Akira!
    • ModMyBox
Re: u360 1 button not working
« Reply #6 on: October 30, 2008, 02:57:00 pm »
soldered it, and its working again..

pfew.. saved my trouble of shipping etc..
Logged
Pages: [1]
  
Go Up
« previous next »