Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Arcade VGA and J-pac issue.  (Read 1161 times)

0 Members and 1 Guest are viewing this topic.

rusolinio

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 70
  • Last login:December 14, 2010, 08:21:22 pm
Arcade VGA and J-pac issue.
« on: October 23, 2008, 01:24:20 pm »
Hi guys,

  I just hooked up the Ultimarc Arcade vga card to a j-pac inside my ki2 cab with a wells gardner U2000 monitor, and i get no picture.

I'm assuming its because i didnt set the resolution correctly, so could someone tell me a good resolution to start off with  for games like killer instinct, mortal kombats, etc...?

Failing my assumption, can anyone shed any further light in regards to my issue?

Logged

CheffoJeffo

  • Cheffo's right! ---saint
  • Wiki Master
  • Trade Count: (+2)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 7784
  • Last login:July 14, 2025, 12:11:49 pm
  • Worthless button pusher!
Re: Arcade VGA and J-pac issue.
« Reply #1 on: October 23, 2008, 01:55:49 pm »
How are the jumpers on the JPac set and what is the sync indicator LED doing ?

Logged
Working: Not Enough
Projects: Too Many
Progress: None

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Arcade VGA and J-pac issue.
« Reply #2 on: October 23, 2008, 01:58:56 pm »
The most common issue is the J-PAC is not connected to the PC USB or PS/2 port so has no power.

If this is not the problem, its better resolved by email: andy@ultimarc.com
Logged

rusolinio

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 70
  • Last login:December 14, 2010, 08:21:22 pm
Re: Arcade VGA and J-pac issue.
« Reply #3 on: October 23, 2008, 02:17:31 pm »
The jumpers are set at default (15khz and 31khz). i have a 'sync in' amber light on, and the self test led is on constantly (red).

i did notice the ps2 port was a little hard to push in, but i made sure it was in all the way.

Email sent.
Logged
Pages: [1]
  
Go Up
« previous next »