Author Topic: djurests mame - I need info about coin mechs? (Read 1124 times)

djuret · « **on:** October 20, 2008, 11:21:37 am »

Hi!

I've finally decided to build my own MAME-cabinet.
I will probably order my parts from happcontrols.com.

I've read quite alot but have one question regarding this coin-mech.
http://www.happcontrols.com/coindoors/42303900.htm

Does it have a front? should i buy a coin-front and then install this coin-mech behind it?
If so, how do I know what fronts are compatible with that mech.

Ken Layton · « **Reply #1 on:** October 20, 2008, 11:27:35 am »

That's a raw coin mech/coin chute. You need a coin door to put it in.

djuret · « **Reply #2 on:** October 20, 2008, 11:50:13 am »

Assuming I buy this coin-mech and a fitting coin-door.

Is this mech ready to be wired to a I-PAC?
Or do i need to install a coin-switch which I will wire to the I-PAC?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: djurests mame - I need info about coin mechs? (Read 1124 times)

djuret

djurests mame - I need info about coin mechs?

Ken Layton

Re: djurests mame - I need info about coin mechs?

djuret

Re: djurests mame - I need info about coin mechs?