Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Test Rig Monitor Question  (Read 384 times)

0 Members and 1 Guest are viewing this topic.

zudmsc

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 179
  • Last login:September 07, 2011, 07:44:26 am
Test Rig Monitor Question
« on: September 24, 2008, 09:35:01 am »
I know an RGB monitor is needed like a Commodore 1084.  Will either of these 2 moniotrs work: Apple IIGS or a Tandy CM11?

Michael

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Test Rig Monitor Question
« Reply #1 on: September 24, 2008, 05:23:51 pm »
I think it will work as an RGB monitor for a test rig.   The following list was from an apple forum regarding the GS monitor and others that are compatable including the Commodore that you mentioned.

You should keep an eye out for any analog RGB monitor that can horizontally sync down to 15.75 kHz. These include:

AppleColor RGB Monitor replacement (model A2M6014, the IIgs monitor)
Commodore 1084 models and equivalents like the Magnavox Professional 80
Sony CPD 1302 MultiSynch
NEC MultiSync (original), MultiSync II, MultiSync 3D
Commodore 1902 (although most of these only do digital RGB)
Tandy CM-8 (not sure about model but it was used with the Coco3)
Atari SC1224 (used with the ST series)