Author Topic: Mala + X-Arcade - Scroll once, then stop (Read 3849 times)

Necro · « **on:** September 09, 2008, 12:32:03 am »

Weird problem. If I use my XArcade in Mala, I can only scroll one game per 'push' of a button. It doesn't repeat the button press. What's weirder is that the keyboard connected THROUGH the X-arcade works FINE.

Scrolling is still slow-ish with the keyboard, but it just stops dead with the controller.

Any suggestions would be appreciated. I tried turning off scrolling acceleration and changing the keyboard polling, to no avail.

(Also, definitely not the controller, tested that first).

loadman · « **Reply #1 on:** September 09, 2008, 02:54:06 am »

It could be this:

Have a read

http://forum.arcadecontrols.com/index.php?topic=59399.msg585895#msg585895

It's possible that a feature may be introduced to MaLa in the future to combat it.

Necro · « **Reply #2 on:** September 09, 2008, 09:45:05 am »

Yup, that sounds like the issue. It's weird that no other front end displayed this issue...

So...any ideas on when it would be added?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Mala + X-Arcade - Scroll once, then stop (Read 3849 times)

Necro

Mala + X-Arcade - Scroll once, then stop

loadman

Re: Mala + X-Arcade - Scroll once, then stop

Necro

Re: Mala + X-Arcade - Scroll once, then stop