Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Visio templates wanted: Magstick Plus, Happ 3" trackball, standard button  (Read 2854 times)

0 Members and 1 Guest are viewing this topic.

Diewrecked

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 179
  • Last login:June 20, 2012, 07:34:08 am
  • I want to build my own arcade controls!
Visio templates wanted: Magstick Plus, Happ 3" trackball, standard button
« on: August 21, 2008, 04:32:18 pm »
Hi all,

Subject line says it all. Does anyone have Visio (or whatever) templates for the MagStick Plus and 3" Happ trackball - TOGETHER WITH MOUNTING HOLES, and a standard 29mm button please? Note I am not using a mounting plate for the trackball as it is going into a 2mm steel plate. The templates would need to be 100% accurate because I am going to print the layout template and give it to a car body workshop to drill out for me.

Many TIA you guys
Logged

Diewrecked

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 179
  • Last login:June 20, 2012, 07:34:08 am
  • I want to build my own arcade controls!
Re: Visio templates wanted: Magstick Plus, Happ 3" trackball, standard button
« Reply #1 on: August 24, 2008, 09:50:32 am »
*bump*

Anyone.... ? Please....? :)
Logged

paulscade

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 215
  • Last login:December 26, 2022, 09:40:35 pm
    • My Arcade Project - Blastoff!
Re: Visio templates wanted: Magstick Plus, Happ 3" trackball, standard button
« Reply #2 on: August 24, 2008, 10:30:43 am »
This will get you your MagStik+.
I make no claim to it's accuracy (it was good enough for me).
Logged
... Why is it that you always find it in the last place that you look? ...

kelemvor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 426
  • Last login:May 13, 2012, 09:40:44 am
Re: Visio templates wanted: Magstick Plus, Happ 3" trackball, standard button
« Reply #3 on: August 25, 2008, 10:53:39 am »
Assuming the Mag Stik Plus is the same size as the non-plus, you can get the details here:
http://www.ultimarc.com/controldiags.html
Logged
Pages: [1]
  
Go Up
« previous next »