Author Topic: DK2 Restoration? err... Project? - This machine has been Sold! (Read 21084 times)

RetroACTIVE · « **Reply #40 on:** February 10, 2009, 11:06:22 pm »

I was able to secure two (pricey) blue NOS Nintendo buttons from videogameparts.com... being the AR person that I am I couldn't resist...

Here is a pic of the machine as it sits and waits for the remainder of its identity (artwork)... I will post a final pic when I get the rest of the artwork package from ThisOldGame.... then we'll be done!

TheShanMan · « **Reply #41 on:** February 11, 2009, 12:19:30 pm »

Looking great! Of course the DK bezel is out of place so it will look even better when you get the DKII bezel. TOG is really close to me. I'm hoping to get over to meet Rich and check out his operation sometime soon!

CheffoJeffo · « **Reply #42 on:** February 11, 2009, 07:30:55 pm »

RetroACTIVE · « **Reply #43 on:** February 15, 2009, 09:05:41 pm »

I was missing the wingnuts that hold the pcb on the L brackets... I was able to find replacements from mcmaster...

92625A315
STYLE 4 METRIC 18-8 SS WING-HEAD THUMB SCREW, M5 THREAD, 25MM LENGTH, 0.8MM PITCH

audihere · « **Reply #44 on:** February 15, 2009, 11:33:19 pm »

Where can I buy the mounting screws for the coin mechs on a DK coin door? Looks like they may have been included with the new mechs? Are they available separately?

RetroACTIVE · « **Reply #45 on:** February 16, 2009, 08:04:52 pm »

Quote from: audihere on February 15, 2009, 11:33:19 pm

Where can I buy the mounting screws for the coin mechs on a DK coin door? Looks like they may have been included with the new mechs? Are they available separately?

I've not seen them separately... you may have better luck finding some used ones. The last time I checked videogameparts.com had some.

audihere · « **Reply #46 on:** February 17, 2009, 11:04:09 pm »

Where are people buying these new coin mechs pictured above in the US?

Are the $10 Pinball Resource DK Jr ones the same?

They look very nice, but is the "ear" coin catcher easily swapped in for the "U" shape one that appears to be included with the new mech?

RetroACTIVE · « **Reply #47 on:** February 18, 2009, 07:30:52 am »

Quote from: audihere on February 17, 2009, 11:04:09 pm

Where are people buying these new coin mechs pictured above in the US?

Are the $10 Pinball Resource DK Jr ones the same?

They look very nice, but is the "ear" coin catcher easily swapped in for the "U" shape one that appears to be included with the new mech?

The coin selectors for this restore were purchased directly from AsahiSeiko (www.asahiseikousa.com). You have to call them, as they do not have a web store. I emailed them first and a sales rep responded. As far as the pinball resource ones... I'm not sure you would have to check with them. Swapping the coin catcher is easy... you have to simply unscrew it from the inside of the faceplate which may involve removing the faceplate first.

CheffoJeffo · « **Reply #48 on:** March 14, 2009, 09:36:31 am »

You know, you should really write this up for GameRoom Magazine -- people want to read about cool restos and this certainly qualifies.

WunderCade · « **Reply #49 on:** March 14, 2009, 03:28:08 pm »

It's a shame to waste NOS blue buttons on a D2K, I can't think of a better candidate for the aftermarket buttons. Save the NOS one's for your authentic Kongs.

My 2 cents.

RetroACTIVE · « **Reply #50 on:** March 15, 2009, 12:41:35 pm »

Quote from: CheffoJeffo on March 14, 2009, 09:36:31 am

You know, you should really write this up for GameRoom Magazine -- people want to read about cool restos and this certainly qualifies.

Hey man thanks for the compliment!... I would love to do a write up, it would be really really neat!

Quote from: WunderCade on March 14, 2009, 03:28:08 pm

It's a shame to waste NOS blue buttons on a D2K, I can't think of a better candidate for the aftermarket buttons. Save the NOS one's for your authentic Kongs.

My 2 cents.

I hear ya but I think maybe "waste" is a bit harsh... I mean if it were a x-in-1 or some other conversion... I'd agree with you. Besides those two NOS buttons will see very little action... so they will be well cared for in my warm home...

CheffoJeffo · « **Reply #51 on:** March 15, 2009, 05:53:27 pm »

Quote from: RetroACTIVE on March 15, 2009, 12:41:35 pm

Quote from: CheffoJeffo on March 14, 2009, 09:36:31 am
You know, you should really write this up for GameRoom Magazine -- people want to read about cool restos and this certainly qualifies.

Hey man thanks for the compliment!... I would love to do a write up, it would be really really neat!

Well, then, since I don't need you to fix my stupid Joust sound board ...

Level42 · « **Reply #52 on:** March 16, 2009, 07:38:28 am »

Being anal:

Is it me or is that jump button unusually high up ? (Compare it to the P1/P2 buttons).

RetroACTIVE · « **Reply #53 on:** March 16, 2009, 06:14:25 pm »

Quote from: Level42 on March 16, 2009, 07:38:28 am

Being anal:

Is it me or is that jump button unusually high up ? (Compare it to the P1/P2 buttons).

You are correct sir! I had 2 orange buttons to choose from, one had bad coloring and that one, which the retainer clip slot was a bit off, causing the difference in height you see.

I opted for the cleaner colored one

rockin_rick · « **Reply #54 on:** March 16, 2009, 07:57:11 pm »

If it bothers you, you could shim the button down a tad. A thin washer would work but may be slightly 'rattlely' or an o-ring would do the same without the rattle.

Rick

RetroACTIVE · « **Reply #55 on:** March 16, 2009, 09:43:50 pm »

Quote from: rockin_rick on March 16, 2009, 07:57:11 pm

If it bothers you, you could shim the button down a tad. A thin washer would work but may be slightly 'rattlely' or an o-ring would do the same without the rattle.

Rick

Yeah I thought of that too... but I'm ok with it as is though as it's original whether I like it or not

jumpman · « **Reply #56 on:** March 29, 2009, 09:36:04 pm »

Excellent work! I am looking for the original blue and orange nintendo buttons, videogameparts.com is out of stock do you know anywhere else that would sell them? They are out of stock for the nintendo marquee bulb, is that a common bulb that can be found at a Lowes or HD?

RetroACTIVE · « **Reply #57 on:** March 29, 2009, 10:14:15 pm »

Quote from: jumpman on March 29, 2009, 09:36:04 pm

Excellent work! I am looking for the original blue and orange nintendo buttons, videogameparts.com is out of stock do you know anywhere else that would sell them? They are out of stock for the nintendo marquee bulb, is that a common bulb that can be found at a Lowes or HD?

The buttons are a pain to find... If someone would repro them, they would sell well!

It's a 100V bulb and is special... I've never purchased one but everytime it's brought up most people say topbulb.com is the place to get it.

javeryh · « **Reply #58 on:** March 30, 2009, 04:12:23 pm »

Quote from: jumpman on March 29, 2009, 09:36:04 pm

Excellent work! I am looking for the original blue and orange nintendo buttons, videogameparts.com is out of stock do you know anywhere else that would sell them? They are out of stock for the nintendo marquee bulb, is that a common bulb that can be found at a Lowes or HD?

I ordered mine from Mike's Arcade. They were pricey ($15) but at the end of the day and over the life of the cab $15 is nothing for some original Nintendo buttons!

stealthie · « **Reply #59 on:** March 30, 2009, 07:21:57 pm »

What's the difference between NOS Nintendo buttons and the $5 Nintendo buttons from Mike's Arcade? Is it just the originality factor of owning a real Nintendo button?

RetroACTIVE · « **Reply #60 on:** March 30, 2009, 09:16:42 pm »

Quote from: Stealthie on March 30, 2009, 07:21:57 pm

What's the difference between NOS Nintendo buttons and the $5 Nintendo buttons from Mike's Arcade? Is it just the originality factor of owning a real Nintendo button?

Mike's are not exact in color and shape as original Nintendo and for most it's irrelevant. I think Mike's may even be out of replacements at this point too.

WunderCade · « **Reply #61 on:** March 30, 2009, 09:16:55 pm »

The originals are different than the repros, the original have a distinct midnight-blue hue to them and are tall with a more pronounced edge around them. They really don't look like the repros at all - other than being in the blue family of color.

RetroACTIVE · « **Reply #62 on:** July 03, 2009, 11:21:51 pm »

Tracking number came today from TOG!

RetroACTIVE · « **Reply #63 on:** July 09, 2009, 06:12:02 pm »

Side art arrived today!

Still waiting on the bezel and ID plate.

Hopefully Ill get this stuff applied soon... I've got zero time this summer

RetroACTIVE · « **Reply #64 on:** March 22, 2010, 11:33:11 am »

Well... this is the first machine that I put my blood sweat and cash into then turned around and sold. I'm happy it is in the hands of a true DK/DK2 fan. I on the other hand was more interested in the build than the game itself. The cash is going into a pin purchase so its all good.

Good bye #35 (I did finally get the ID plate, just in time to sell the machine HA!)

Level42 · « **Reply #65 on:** March 23, 2010, 04:35:11 am »

Wow, I'd never let go of a beauty like that...but if you prefer pins.

Did you ever make pics with the side art installed ?

RetroACTIVE · « **Reply #66 on:** March 23, 2010, 08:13:41 am »

Quote from: Level42 on March 23, 2010, 04:35:11 am

Wow, I'd never let go of a beauty like that...but if you prefer pins.

Did you ever make pics with the side art installed ?

I did take some really nice parting shots... I will make them my final post to this thread.

RetroACTIVE · « **Reply #67 on:** March 23, 2010, 04:45:18 pm »

Yes it was a very nice machine.... and the gent who picked it up drove for approx 7 hours to get it ... he was thrilled!

CheffoJeffo · « **Reply #68 on:** March 24, 2010, 01:50:29 pm »

Wow .... she's a beaut!

opt2not · « **Reply #69 on:** March 25, 2010, 02:53:42 am »

I agree, that's some gorgeous arcade eye-candy right there. The owner of this cab better take good care of it.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news