Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: How Do I Replace Cam lock Keys?  (Read 6640 times)

0 Members and 1 Guest are viewing this topic.

Boingo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:March 14, 2014, 09:13:41 pm
How Do I Replace Cam lock Keys?
« on: July 28, 2008, 03:14:11 pm »
I have a Nintendo Versus sit down cabinet, which still has its original cam locks on it.  Unfortunately, I do not have the keys that go with the cam locks.  I really do not want to buy new cam locks for it, since I would rather keep the originals.  What I am hoping to do is simply buy a key, then alter the locks slightly so that they will use the new key to open.

I know that with barrel locks, you can make them function by removing the barrel, inserting the new key, then filing the pins down flush with the barrel, but these are the kind of locks with keys similar to ones used in bicycle locks, and I am not sure what to do with these ones.

Does anyone know how to get cam locks of this type  functioning?
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: How Do I Replace Cam lock Keys?
« Reply #1 on: July 28, 2008, 03:17:53 pm »
Even though this isn't what you want to hear, drill it out and install a new one. That's your best option. Not expensive to replace.
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: How Do I Replace Cam lock Keys?
« Reply #2 on: July 28, 2008, 11:46:48 pm »
All Nintendo cabinets (upright or table or tent) use Nintendo standard key number K6510 for the monitor lid and back doors. The cashbox door lock is always keyed individually and is 5/8" long.

I think Arcadeshop or Mike's Arcade sells precut k6510 keys.
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: How Do I Replace Cam lock Keys?
« Reply #3 on: July 28, 2008, 11:55:28 pm »
Good to hear better options than what I gave! ;D
Logged

Boingo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:March 14, 2014, 09:13:41 pm
Re: How Do I Replace Cam lock Keys?
« Reply #4 on: July 29, 2008, 06:56:43 pm »
Ugh.   :-\

I've been looking around, and I can not find new cam locks.  Well ... I did find one, but it was not what I hoped for.

Searching the net didn't do much for me either.   :-[
Logged

tba

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 118
  • Last login:July 21, 2010, 12:27:08 am
  • I want to build my own arcade controls!
Re: How Do I Replace Cam lock Keys?
« Reply #5 on: July 30, 2008, 07:23:17 am »
i got my cam locks at home depot, they sell them as "drawer locks" for bathroom medicine drawers and such. i found them in the safety "baby proofing" isle.
Logged

SirPeale

  • Green Mountain Man
  • Global Moderator
  • Trade Count: (+23)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 12963
  • Last login:August 04, 2023, 09:51:57 am
  • Arcade Repair in New England
    • Arcade Game and Other Coin-Op Projects
Re: How Do I Replace Cam lock Keys?
« Reply #6 on: July 30, 2008, 10:00:12 am »
Quote from: Boingo on July 29, 2008, 06:56:43 pm
Ugh.   :-\

I've been looking around, and I can not find new cam locks.  Well ... I did find one, but it was not what I hoped for.

Searching the net didn't do much for me either.   :-[

I have them in my store.  Link is in my signature.
Logged

HaRuMaN

  • Supreme Solder King
  • Global Moderator
  • Trade Count: (+45)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 10328
  • Last login:July 23, 2025, 07:04:20 pm
  • boom
    • Arcade Madness
Re: How Do I Replace Cam lock Keys?
« Reply #7 on: July 30, 2008, 10:31:03 am »
Quote from: Ken Layton on July 28, 2008, 11:46:48 pm
I think Arcadeshop or Mike's Arcade sells precut k6510 keys.

Nope.  Already asked them, they do not.
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: How Do I Replace Cam lock Keys?
« Reply #8 on: July 30, 2008, 11:49:25 am »
Many game operators probably have tons of extra K6510 keys laying around.
Logged

DrFrag

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 215
  • Last login:December 15, 2011, 10:14:47 am
    • MAME Cab Worklog
Re: How Do I Replace Cam lock Keys?
« Reply #9 on: July 31, 2008, 01:19:48 pm »
If you can dismantle it, you should be able to get a locksmith to make a key for it or reconfigure the lock for a new key.

However some Chinese-made cam locks are pressed together and can't be dismantled.  Good luck!
Logged

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: How Do I Replace Cam lock Keys?
« Reply #10 on: July 31, 2008, 04:38:23 pm »
Takigen still makes these K6510 locks and keys:


http://www.takigen.com/english/contents/eyesearch/detail.do?name=20335
Logged

Boingo

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 42
  • Last login:March 14, 2014, 09:13:41 pm
Re: How Do I Replace Cam lock Keys?
« Reply #11 on: August 01, 2008, 11:02:41 am »
Excellent!

I am glad to get that link.
Logged
Pages: [1]
  
Go Up
« previous next »