Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: WTB: Bezel for Pole Position shifter  (Read 1626 times)

0 Members and 1 Guest are viewing this topic.

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
WTB: Bezel for Pole Position shifter
« on: July 17, 2008, 01:29:07 am »
I'm searching for the green marked piece in the drawing.

It's the bezel on top of the Pole Position control panel and holds the shifter.


Shipping to Germany or, if you don't want to do that, shipping to my relatives in Tampa :)

Thanks....
Logged

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: WTB: Bezel for Pole Position shifter
« Reply #1 on: July 19, 2008, 05:28:42 am »
Nothing at all??  :cry:

Logged

Franco B

  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3766
  • Last login:February 15, 2024, 09:14:06 am
Re: WTB: Bezel for Pole Position shifter
« Reply #2 on: July 19, 2008, 05:41:17 am »
If you can get the dimensions for it I could make you one?
Logged

Luigi

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 612
  • Last login:April 05, 2021, 11:28:40 am
  • Collecting/restoring cabs
Re: WTB: Bezel for Pole Position shifter
« Reply #3 on: July 19, 2008, 01:54:06 pm »
Thanks Franco.....that would be the last option: to make one on my own from steel. But I even don't have a broken one....I'll try to get my hands on one to get the dimensions.

Maybe I could make one until I get an original part...I already have an idea..... :)
Logged
Pages: [1]
  
Go Up
« previous next »