Author Topic: Need Info on multi Jamma adapters for killer Instinct 1+2 (Read 946 times)

ctozzi · « **on:** July 14, 2008, 04:50:08 pm »

i want to be able to switch from KI1 to KI2 in my dedicated KI2 cabinet. I was looking at 2 to 1 jamma adapters on ebay. Anyone have this ? I do NOT want to start cutting/splicing wires or add another power supply. So those of you who have done this without those issues please let me know what product to buy.
Here is the item on ebay I'm looking at.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310044694440&_trksid=p3907.m32&_trkparms=tab%3DWatching

Turnarcades · « **Reply #1 on:** July 14, 2008, 06:39:14 pm »

Assuming the hard drives on the KI boards do not require an extra power supply, this should work fine as the PCB's have a standard Jamma interface.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Need Info on multi Jamma adapters for killer Instinct 1+2 (Read 946 times)

ctozzi

Need Info on multi Jamma adapters for killer Instinct 1+2

Turnarcades

Re: Need Info on multi Jamma adapters for killer Instinct 1+2