Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Wanted - Clip in pins for jamma harness  (Read 1594 times)

0 Members and 1 Guest are viewing this topic.

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Wanted - Clip in pins for jamma harness
« on: July 09, 2008, 05:19:20 am »
Hello there:-D I ended up getting a premade jamma harness against my better judgment, and now I need to wire it for my neo geo board. All I need is a few pins to clip into the harness so that I can wire up the extra connections to my buttons and such. Lets say 10. Wanna make a deal? Let me know.

Thanks a lot!!
Sam
Logged

shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: Wanted - Clip in pins for jamma harness
« Reply #1 on: July 09, 2008, 08:11:48 am »
Do jamma harnesses use .157 molex pins? If so, I think I have a bag around here somewhere for my pin.
Logged

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: Wanted - Clip in pins for jamma harness
« Reply #2 on: July 25, 2008, 03:55:45 am »
Anyone have any info on this? I bought the premade harness with all of the wires attached and now I need the pins to wire just a couple more things. I'll pay good I promise!

Or $20 to whoever snags me a premade neogeo harness:-)
Logged

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14019
  • Last login:July 25, 2025, 05:49:10 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Wanted - Clip in pins for jamma harness
« Reply #3 on: July 25, 2008, 08:09:46 am »
Quote from: uprightbass360 on July 25, 2008, 03:55:45 am
Anyone have any info on this? I bought the premade harness with all of the wires attached and now I need the pins to wire just a couple more things. I'll pay good I promise!

Or $20 to whoever snags me a premade neogeo harness:-)

you shoulda just bought the entire neogeo cab from me, $300 +shipping lol
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.

BASS!

  • Just have fun.
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 837
  • Last login:August 10, 2013, 03:12:33 am
Re: Wanted - Clip in pins for jamma harness
« Reply #4 on: July 27, 2008, 05:56:17 am »
Quote from: Malenko on July 25, 2008, 08:09:46 am
Quote from: uprightbass360 on July 25, 2008, 03:55:45 am
Anyone have any info on this? I bought the premade harness with all of the wires attached and now I need the pins to wire just a couple more things. I'll pay good I promise!

Or $20 to whoever snags me a premade neogeo harness:-)

you shoulda just bought the entire neogeo cab from me, $300 +shipping lol

Hehehehe:-) But then I wouldn't have the pleasure of building a neo console.
Logged

jimkirk

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 59
  • Last login:October 27, 2013, 01:24:15 am
  • Ahead warp factor 5 Mr. Sulu.
Re: Wanted - Clip in pins for jamma harness
« Reply #5 on: July 28, 2008, 01:35:26 am »
Quote from: uprightbass360 on July 25, 2008, 03:55:45 am
Anyone have any info on this? I bought the premade harness with all of the wires attached and now I need the pins to wire just a couple more things. I'll pay good I promise!

Or $20 to whoever snags me a premade neogeo harness:-)
Try bob Roberts he has split pins for jamma harness
Logged
I know who Phet is and many of you do not.

Malenko

  • KNEEL BEFORE ZODlenko!
  • Trade Count: (+58)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 14019
  • Last login:July 25, 2025, 05:49:10 pm
  • Have you played with my GingerBalls?
    • forum.arcadecontrols.com/index.php/topic,142404.msg1475162.html
Re: Wanted - Clip in pins for jamma harness
« Reply #6 on: July 28, 2008, 11:16:18 am »
not to derail the thread but the package shows as delivered, everything arrive ok?

free bump!
Logged
If you're replying to a troll you are part of the problem.
I also need to follow this advice. Ignore or report, don't reply.
Pages: [1]
  
Go Up
« previous next »