Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Wiring a Power switch.  (Read 1008 times)

0 Members and 1 Guest are viewing this topic.

wonkalow

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:February 11, 2010, 05:34:41 pm
Wiring a Power switch.
« on: June 22, 2008, 06:11:49 pm »
So im about ready to power up my first mame machine for the first time, however unfortunately during the process, the 4 quick disconnects that plug into the On/off switch have come off. They are unlabeled and I cant seem to find anything searching so far on which wires go to which of the 4 prongs. The 4 wires are still together, so I know which 4 to use, just not which prong to plug which wire into.
Anyone have any idea or know of a site that might help out ?

wonkalow

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 72
  • Last login:February 11, 2010, 05:34:41 pm
Re: Wiring a Power switch.
« Reply #1 on: June 22, 2008, 07:08:22 pm »
I found the Manual to the cabinet here.
http://www.crazykong.com/manuals/MortalKombat2.man.pdf

But it's still not too helpful. Here a picture of what im working with.