Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Mini-PAC and caps/scroll/num lock LEDs  (Read 1646 times)

0 Members and 1 Guest are viewing this topic.

vizzinni

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 109
  • Last login:November 03, 2024, 08:52:08 am
  • Inconceivable
Mini-PAC and caps/scroll/num lock LEDs
« on: June 07, 2008, 07:07:18 pm »
I posted this question on the Mameworld Ultimarc board eariler today but haven't had a response, so I thought I'd try it here...

Does the Mini-PAC have the same ability to control the caps/scroll/num lock LEDs that the I-PAC has? If so, which pins on the 10-pin header are used? The wiring diagram only shows the pins for +5v and ground.


Logged

TheShanMan

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1912
  • Last login:October 22, 2024, 11:51:12 am
    • My Arcade (updated 1/30/13)
Re: Mini-PAC and caps/scroll/num lock LEDs
« Reply #1 on: June 07, 2008, 07:25:10 pm »
I have an ipac4, but my understanding is that the minipac has it too. 3 of the inputs double as LED outputs. However, you may not want to use them for both input and output at the same time, because if you do, pushing the button will cause the LED to turn on.
Logged
My Collection: Mame cab, 38 dedicated vids, pin, skeeball, coin op air hockey table, Ice Cold Beer, Megatouch, 2 token machines, and payphone (VAPS, pics at Arcade Crusade)

Add Ambience to your mame cab setup

AndyWarne

  • Trade Count: (+18)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1938
  • Last login:April 11, 2021, 03:37:09 am
    • Ultimarc
Re: Mini-PAC and caps/scroll/num lock LEDs
« Reply #2 on: June 08, 2008, 06:36:48 am »
The Mini-PAC does support the LEDs.
The pinout is the same as the I-PAC header which is on http://www.ultimarc.com/ipac2.html
Andy
Logged

vizzinni

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 109
  • Last login:November 03, 2024, 08:52:08 am
  • Inconceivable
Re: Mini-PAC and caps/scroll/num lock LEDs
« Reply #3 on: June 08, 2008, 07:52:15 am »
Thanks Andy.  I asked because the Mini-PAC header isn't exactly the same as the I-PAC's, and the wiring diagram/pinout on the Mini-PAC page doesn't reflect the caps/num/scroll.  But I now can see the correct pins, so thanks.

Logged
Pages: [1]
  
Go Up
« previous next »