Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: U360 mounting question  (Read 1368 times)

0 Members and 1 Guest are viewing this topic.

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:June 17, 2025, 02:49:55 pm
  • Is it hot in here?
U360 mounting question
« on: May 25, 2008, 08:14:53 pm »
I'm assuming that I could mount the U360's sideways and then reconfigure the inputs in the software.  Is this correct?  I'm trying to deal with a possible space issue.
Logged

nuka1195

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 148
  • Last login:April 18, 2020, 08:47:25 pm
Re: U360 mounting question
« Reply #1 on: May 25, 2008, 08:18:08 pm »
or just remove the base plate and turn it 90 degrees.
Logged

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:Today at 12:19:12 pm
  • warning: drew can't handle my avatar...
Re: U360 mounting question
« Reply #2 on: May 25, 2008, 08:35:56 pm »
Quote from: nuka1195 on May 25, 2008, 08:18:08 pm
or just remove the base plate and turn it 90 degrees.

indeed...just do this...super simple & effective... :cheers:
Logged

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:June 17, 2025, 02:49:55 pm
  • Is it hot in here?
Re: U360 mounting question
« Reply #3 on: May 25, 2008, 09:21:38 pm »
Ok..  Let me preface this by saying that I don't have the sticks in hand yet (they're still on holiday with Franco  ;)).  The base plate and base end up being mounted perpendicular to each other.  Am I understanding this correctly?

Thanks for the tips, guys.
Logged

Zobeid

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 238
  • Last login:April 21, 2021, 10:36:32 pm
Re: U360 mounting question
« Reply #4 on: May 25, 2008, 09:30:32 pm »
Quote from: somunny on May 25, 2008, 09:21:38 pm
Ok..  Let me preface this by saying that I don't have the sticks in hand yet (they're still on holiday with Franco  ;)).  The base plate and base end up being mounted perpendicular to each other.  Am I understanding this correctly?

The joystick base, the plastic housing, is square.  Only the metal mounting plate is rectangular.  You can easily orient that plate either way, horizontal or vertical as you wish.  I put mine vertical.

Logged

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:June 17, 2025, 02:49:55 pm
  • Is it hot in here?
Re: U360 mounting question
« Reply #5 on: May 25, 2008, 09:34:17 pm »
Ah, got it.  Thanks!
Logged

Ginsu Victim

  • Yeah, owning a MAME cab only leads to owning real ones. MAME just isn't good enough. It's a gateway drug.
  • Trade Count: (+10)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10092
  • Last login:June 28, 2025, 10:45:55 pm
  • Comanche, OK -- USA
Re: U360 mounting question
« Reply #6 on: May 25, 2008, 09:53:25 pm »
When you get yours, it'll make even more sense. You'll look and go, "Ooooooh, I see!"
Logged
Pages: [1]
  
Go Up
« previous next »