Author Topic: Coin door placement question (Read 1065 times)

ivwshane · « **on:** May 15, 2008, 03:01:02 pm »

Is there a typical height or distance from the cp (or bottom of the cab) the coin door should be installed at?

I have a happ coin door and I want to make sure I cut it out correctly the first time and it's in the right place.
http://www.happcontrols.com/coindoors/40005500.htm

Any tips welcome as well (yes I have read up on people forgetting to not cut out the corners;))

HaRuMaN · « **Reply #1 on:** May 15, 2008, 03:06:28 pm »

No requirements... just place it where it's comfortable for you to reach it and insert coins.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Coin door placement question (Read 1065 times)

ivwshane

Coin door placement question

HaRuMaN

Re: Coin door placement question