Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: exact angulation of the ms pac/galaga cp and monitor?  (Read 846 times)

0 Members and 1 Guest are viewing this topic.

coltchillin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 98
  • Last login:February 06, 2010, 05:28:43 am
    • My Midway replica project Flickr
exact angulation of the ms pac/galaga cp and monitor?
« on: May 10, 2008, 08:20:41 am »
anybody willing to measure?
thanks.

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10994
  • Last login:July 06, 2024, 08:43:49 pm
  • Awesome face!
Re: exact angulation of the ms pac/galaga cp and monitor?
« Reply #1 on: May 10, 2008, 09:40:12 am »
I am fairly sure that info already exists in the multiple sets of plans out there for those cabinets.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

coltchillin

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 98
  • Last login:February 06, 2010, 05:28:43 am
    • My Midway replica project Flickr
Re: exact angulation of the ms pac/galaga cp and monitor?
« Reply #2 on: May 10, 2008, 10:48:45 am »
ever since i found out those plans are off i'm trying to get the same data from a couple of sources.