Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Add a spinner in a X-Arcade ?  (Read 1059 times)

0 Members and 1 Guest are viewing this topic.

MadEditor

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 67
  • Last login:May 03, 2015, 10:09:44 am
Add a spinner in a X-Arcade ?
« on: May 24, 2003, 06:51:09 am »
Hi all,

Just wondering if anyone has ever heard of someone installing a spinner in a X-arcade?

My main concern is about the positioning as there is'nt much room left...

Thanks for your help ...

Ledbetter

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 40
  • Last login:March 01, 2005, 08:13:19 pm
Re:Add a spinner in a X-Arcade ?
« Reply #1 on: May 24, 2003, 08:09:23 pm »
 If you go here-

http://www.oscarcontrols.com/controlpanels.htm

 He has 4 pages of spinners mounted on different control panels. Didn't see an X-Arcade, but a few Hotrods and many other cp's to give you an idea of where you might want to mount your spinner.

zaphod

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 582
  • Last login:September 04, 2012, 11:11:38 am
    • ArcadeCab.com
Re:Add a spinner in a X-Arcade ?
« Reply #2 on: May 24, 2003, 08:10:41 pm »
I have seen a couple examples of a spinner installed into a Hotrod, which has basically the same dimensions as the X-arcade.  One example is on Oscar's site. http://www.oscarcontrols.com/customize_hotrod.shtml