Author Topic: Namco Arcade Stick mod with a LS-32 (Kowal help!) (Read 2558 times)

Stormrider · « **on:** March 13, 2008, 08:29:51 pm »

I have a LS-32 and some Sanwa OSBN-30RG buttons. I've thought I could use them for modding my Namco Arcade Stick. I've seen the article Kowal has in his website about this mod. However, I don't understand anything. I got some hits by taking a look at the photos. The example seems to be with a Sanwa stick. Now, could you please summarize how to do this with the LS-32?

Kaytrim · « **Reply #1 on:** March 13, 2008, 09:17:58 pm »

You will get much more help over here... http://forums.shoryuken.com/ The guys use Japanese parts a lot more and do the modding you are describing.

TTFN
Kaytrim

kowal · « **Reply #2 on:** March 14, 2008, 02:29:48 am »

RG they do not fit, LS32 is very difficult to installing
translating


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Namco Arcade Stick mod with a LS-32 (Kowal help!) (Read 2558 times)

Stormrider

Namco Arcade Stick mod with a LS-32 (Kowal help!)

Kaytrim

Re: Namco Arcade Stick mod with a LS-32 (Kowal help!)

kowal

Re: Namco Arcade Stick mod with a LS-32 (Kowal help!)