Author Topic: Anyone running a jen-shin or wei-ya chassis on a Polo? (Read 1262 times)

Grauwulf · « **on:** March 06, 2008, 02:55:52 pm »

I've searched but I can't find any definitive answer. Is anyone running a Jen-shin or Wei-Ya replacement chassis on a 25" Hantarex Polo tube using the factory yoke? I have a couple of nice Polo tubes sitting here doing nothing and would like to get chassis on them and put them back in to service.

Any help you can give me would be greatly appreciated.

James

Ken Layton · « **Reply #1 on:** March 06, 2008, 07:05:24 pm »

The Polo's I've seen have the yoke permanently glued to the tube ("bonded").

Yoke info:

Yellow & orange wires are horizontal with a resistance of 1.7 ohms.

Red & brown wires are vertical with a resistance of 5.4 ohms.

Tube is an RCA A63ADT10X05

Grauwulf · « **Reply #2 on:** March 07, 2008, 10:20:55 pm »

Okay, since that is lower than the spec I have seen for either brand of chassis, maybe I'd be further ahead to just try and get working Polo chassis to put on these tubes then?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Anyone running a jen-shin or wei-ya chassis on a Polo? (Read 1262 times)

Grauwulf

Anyone running a jen-shin or wei-ya chassis on a Polo?

Ken Layton

Re: Anyone running a jen-shin or wei-ya chassis on a Polo?

Grauwulf

Re: Anyone running a jen-shin or wei-ya chassis on a Polo?