Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Spinner what Axis?  (Read 1691 times)

0 Members and 1 Guest are viewing this topic.

bent98

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 477
  • Last login:February 02, 2019, 03:35:00 pm
  • Hyperspin Moderator
Spinner what Axis?
« on: February 28, 2008, 08:58:47 pm »
I have a TT2 spinner and a Happ USB 3 inch trackball. Just wondering if I should put it on the x,y, or Z axis? Is there any advantage or disadvantge to putting spinner  on Z axis? Also if I did put it on the Z Axis, which controls setting in Mame do I change?
Logged

fixedpigs

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 627
  • Last login:August 19, 2025, 01:29:35 pm
  • warning: drew can't handle my avatar...
Re: Spinner what Axis?
« Reply #1 on: February 28, 2008, 09:18:29 pm »
sometimes backspin will be a problem on the z axis...it was for me and at least one other guy...
i put it on the x axis and it was good to go...

if you put it on the y axis...then you could use it to scroll through your gamelist on mala...
Logged

bent98

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 477
  • Last login:February 02, 2019, 03:35:00 pm
  • Hyperspin Moderator
Re: Spinner what Axis?
« Reply #2 on: February 28, 2008, 09:21:17 pm »
No conflict with it sharing same as trackball?
Logged

Encryptor

  • Trade Count: (+34)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1287
  • Last login:December 21, 2023, 08:01:18 pm
Re: Spinner what Axis?
« Reply #3 on: February 28, 2008, 10:53:19 pm »
Maybe reading this thread will help you figure out which one to use.

http://forum.arcadecontrols.com/index.php?topic=75693.0

Encryptor
Logged

RandyT

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7022
  • Last login:Yesterday at 09:37:19 am
  • Friends don't let friends hack keyboards.
    • GroovyGameGear.com
Re: Spinner what Axis?
« Reply #4 on: February 29, 2008, 12:33:07 pm »
Quote from: bent98 on February 28, 2008, 09:21:17 pm
No conflict with it sharing same as trackball?

Not if the trackball is on a physically different interface board.  But they cannot both be connected to the same board and axis.

RandyT
Logged
Pages: [1]
  
Go Up
« previous next »