Author Topic: what wire to use for buttons? (Read 1151 times)

Hyperfan · « **on:** February 03, 2008, 07:22:58 am »

What wire should i buy to wire the buttons and joystick? single core or multi core?

Level42 · « **Reply #1 on:** February 03, 2008, 08:37:45 am »

Doesn't matter, as long as it conducts electricity.

MaximRecoil · « **Reply #2 on:** February 03, 2008, 09:09:44 am »

Use stranded 20 or 22 AWG wire. I like 20 AWG because there is more "meat" to crimp the connectors to.

Orclord · « **Reply #3 on:** February 03, 2008, 09:16:47 am »

Yep.....

Plus single core can break if repeatedly moved back and forth in the process of wiring a panel....


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news