Author Topic: Car speakers combined with Creative I-Trigue (Read 1708 times)

Genjuro666 · « **on:** February 03, 2008, 06:28:24 am »

hi,

i know many people here already successfully combined the Creative 2.1 system with car speakers so i thought i give it a try too. Just to be sure that my combination will work too i would like to ask for advice.

I would use a pair of Sony Xplod XS-F6932 and a Creative I-Trigue 3300 2.1

I know that the Creative speakers are shielded but I'm not sure with the car speakers. On the backside you can read the following words : Magnet : Strondium.

Can anyone please help me out here ?

Thx

browndog1978 · « **Reply #1 on:** February 03, 2008, 05:11:10 pm »

The car speakers will not be shielded.

check the link below that shows how to shield em.
http://www.andrewrondeau.com/Voight%20Pipes/shielding.html

tophatne1 · « **Reply #2 on:** February 13, 2008, 10:42:24 pm »

If someone has documented this project I'd like to know as well. Anyone?


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Car speakers combined with Creative I-Trigue (Read 1708 times)

Genjuro666

Car speakers combined with Creative I-Trigue

browndog1978

Re: Car speakers combined with Creative I-Trigue

tophatne1

Re: Car speakers combined with Creative I-Trigue