Author Topic: Sale!! Controller Hacks - Xbox 360, Dreamcast, Xbox, PS2, etc! (Read 419131 times)

sharpfork · « **Reply #200 on:** August 28, 2012, 10:59:55 pm »

Quote from: HaRuMaN on August 23, 2012, 03:24:10 pm

Anyone one the fence about ordering might want to do so soon. My wife and I are expecting our second child at the end of September, and that's going to slow me down considerably.

Congratulations man!

tsubaki · « **Reply #201 on:** August 29, 2012, 10:28:38 pm »

Wow. I want to order some Xbox hacks. I would like to help you out with your new little one with a couple bucks. Haruman, when you're finished, get a lot of sleep.

HaRuMaN · « **Reply #202 on:** August 30, 2012, 09:27:03 am »

Quote from: tsubaki on August 29, 2012, 10:28:38 pm

Wow. I want to order some Xbox hacks. I would like to help you out with your new little one with a couple bucks. Haruman, when you're finished, get a lot of sleep.

Hey, thanks!

I have sent you a PM.

And yeah, trying to stock up on sleep, now.

jmike · « **Reply #203 on:** August 30, 2012, 01:54:57 pm »

Congrats.

Hope it's a gamer

HaRuMaN · « **Reply #204 on:** August 30, 2012, 01:57:00 pm »

Quote from: jmike on August 30, 2012, 01:54:57 pm

Congrats.

Hope it's a gamer

#1 child seems to like Pac-Man, and Super Mario World.

Buck_Lee · « **Reply #205 on:** September 06, 2012, 12:12:11 pm »

If it's not too late... Was hoping to get in an order of two (wired) PS2 hacks, and possibly 1 (wired) 360. I don't have any extras to send, so are these in stock? This could really help out, so I don't spend all my time perfecting my sketchy soldering skills

, and can concentrate on some woodworking and design.

If possible, let's leave the analog sticks mechanisms intact and functional. I/ve been wanting to experiment with some physical mods of an on board analog. Yet, would still like some leads from the D-pads. Not worried about L3 or R3 clicks though.

Congrats to you

I feel for you on the whole sleep thing. My little one is almost a year

HaRuMaN · « **Reply #206 on:** September 06, 2012, 12:21:05 pm »

Quote from: Buck_Lee on September 06, 2012, 12:12:11 pm

If it's not too late... Was hoping to get in an order of two (wired) PS2 hacks, and possibly 1 (wired) 360. I don't have any extras to send, so are these in stock? This could really help out, so I don't spend all my time perfecting my sketchy soldering skills , and can concentrate on some woodworking and design.

If possible, let's leave the analog sticks mechanisms intact and functional. I/ve been wanting to experiment with some physical mods of an on board analog. Yet, would still like some leads from the D-pads. Not worried about L3 or R3 clicks though.

Congrats to you I feel for you on the whole sleep thing. My little one is almost a year

Nope, not too late. I will send you a PM.

HaRuMaN · « **Reply #207 on:** September 06, 2012, 12:31:20 pm »

PM sent.

stpcore · « **Reply #208 on:** September 19, 2012, 11:05:00 am »

Hope all is going well with the family!

If you have time could I get a price on 2 original XBOX controller hacks?

Thanks in advance!!!

HaRuMaN · « **Reply #209 on:** September 19, 2012, 11:11:00 am »

Quote from: stpcore on September 19, 2012, 11:05:00 am

Hope all is going well with the family!

If you have time could I get a price on 2 original XBOX controller hacks?

Thanks in advance!!!

Still a little time left. Sent you a PM, thanks!

HaRuMaN · « **Reply #210 on:** October 09, 2012, 12:57:18 pm »

Things are going pretty well with the little one, so feel free to place an order. I'm a little slower, but nothing too bad. Thanks!

Barry Barcrest · « **Reply #211 on:** November 08, 2012, 10:19:54 am »

Needs.... More..... Pinball....

GnobarEl · « **Reply #212 on:** December 03, 2012, 09:24:15 am »

Hello,

I have 2 controllers similar to this one:
http://geralgamesfps.blogspot.pt/2011/10/driver-joystick-vibration-x-tech-ns3121.html

Can I use this hack to control mame? Will I get LAG or it will work fine?
My doubt is if I can use them or should I buy an iPAC?

Thanks!

HaRuMaN · « **Reply #213 on:** December 03, 2012, 09:46:10 am »

Quote from: GnobarEl on December 03, 2012, 09:24:15 am

Hello,

I have 2 controllers similar to this one:
http://geralgamesfps.blogspot.pt/2011/10/driver-joystick-vibration-x-tech-ns3121.html

Can I use this hack to control mame? Will I get LAG or it will work fine?
My doubt is if I can use them or should I buy an iPAC?

Thanks!

I have never seen that type of controller so I can't comment. If you want something that for sure works out the box, then I would go with an iPac.

GnobarEl · « **Reply #214 on:** December 03, 2012, 10:11:58 am »

Thanks,
I have both controls with me. I will try to connect both and play some games with them. If they work ok I believe it will be ok with the hack.

This is a dumb question, is any loos of performance with the hack?

Thanks!

HaRuMaN · « **Reply #215 on:** December 03, 2012, 10:21:14 am »

Quote from: GnobarEl on December 03, 2012, 10:11:58 am

Thanks,
I have both controls with me. I will try to connect both and play some games with them. If they work ok I believe it will be ok with the hack.

This is a dumb question, is any loos of performance with the hack?

Thanks!

Nope. When hacked, the performance will be the same.

GnobarEl · « **Reply #216 on:** December 03, 2012, 10:22:38 am »

Thanks,
so, later at home I will connect both controllers and play some games with them. If everything work fine, I belive I can use them.

Thanks for your support.

Big.D · « **Reply #217 on:** December 06, 2012, 12:51:44 pm »

Hi there,

For some reason I can't PM you Har...

I'm looking for 2 xbox origonal contollers to be hacked. Now, i'm new to all of this. I can just plug and play once I wire the buttons to your strip?

let me know -

Big.D!

please include your location (for shipping) and how much you will charge for xbox origonal controller (x2). Please also include how much you'd charge for buying two contollers @ your location (craiglist/kijiji/used... .com). Thanks bud!

HaRuMaN · « **Reply #218 on:** December 06, 2012, 01:11:15 pm »

Quote from: Big.D on December 06, 2012, 12:51:44 pm

Hi there,

For some reason I can't PM you Har...

I'm looking for 2 xbox origonal contollers to be hacked. Now, i'm new to all of this. I can just plug and play once I wire the buttons to your strip?

let me know -

Big.D!

please include your location (for shipping) and how much you will charge for xbox origonal controller (x2). Please also include how much you'd charge for buying two contollers @ your location (craiglist/kijiji/used... .com). Thanks bud!

It's because of your post count. PM sent.

tommyinajar · « **Reply #219 on:** December 07, 2012, 11:43:27 am »

Are the Madcatz FightPad SD the same as the older ones? If so they have $20 off at Madcatz. Comes out to $20 each with 9$ total on shipping even with multiple controllers. Seems like an ok deal if you don't ebay.

(They also have PS3 ones, are those hackable??)

http://www.madcatz.com/mad-catz-at-the-street-fighter-25th-grand-finals-preview-special-promo/

HaRuMaN · « **Reply #220 on:** December 07, 2012, 12:02:57 pm »

Quote from: tommyinajar on December 07, 2012, 11:43:27 am

Are the Madcatz FightPad SD the same as the older ones? If so they have $20 off at Madcatz. Comes out to $20 each with 9$ total on shipping even with multiple controllers. Seems like an ok deal if you don't ebay.

(They also have PS3 ones, are those hackable??)

http://www.madcatz.com/mad-catz-at-the-street-fighter-25th-grand-finals-preview-special-promo/

I have never tried the SD ones... I'm guessing they are the same inside, but can't confirm that.

As far as PS3, I don't know. Never tried that one. They are wireless, and use a dongle. You'd be better off using a six-axis controller to take advantage of the bluetooth / usb wired.

imkonlao · « **Reply #221 on:** January 03, 2013, 10:43:53 pm »

Hi, could I please get a quote for 4 xbox 360 wired controllers.
Just registered for this section :p

HaRuMaN · « **Reply #222 on:** January 04, 2013, 08:32:09 am »

Quote from: imkonlao on January 03, 2013, 10:43:53 pm

Hi, could I please get a quote for 4 xbox 360 wired controllers.
Just registered for this section :p

PM sent!

HaRuMaN · « **Reply #223 on:** January 10, 2013, 12:42:37 pm »

Queue now at zero. Get your order in and be first in line.

I've got 5 macatz fightpads on hand, so anyone looking for some wired 360 hacks this would be a good time to order for a quick turnaround.

nuker43 · « **Reply #224 on:** January 18, 2013, 03:50:31 am »

Could i get a PM? i have a few questions about these hacks... im working on trying to get every single console controller hooked up to a pc.

Thanks

nuker43 · « **Reply #225 on:** January 19, 2013, 03:52:06 pm »

Not sure if you got my email but i sent one

thanks!

HaRuMaN · « **Reply #226 on:** January 21, 2013, 08:53:57 am »

Quote from: nuker43 on January 19, 2013, 03:52:06 pm

Not sure if you got my email but i sent one

thanks!

Email replied.

marioxb · « **Reply #227 on:** January 21, 2013, 05:14:46 pm »

Hey HaRuMaN, congrats on the baby! Hopefully one day my wife and I will be able to have kids.

Have you ever hacked a Classic Controller Pro for the Wii? I don't need the analogs, just the digital buttons. I had a few questions for a project I'm working on. I want to stuff a Wii Remote's guts into the CCP shell and I can't seem to find any info online on what the possible solder points are on the Classic Controller (Pro). Particularly how do you solder where the tact switches are (home, -, +, sync).

Any help would be appreciated! Thanks!

HaRuMaN · « **Reply #228 on:** January 22, 2013, 08:41:07 am »

Quote from: marioxb on January 21, 2013, 05:14:46 pm

Hey HaRuMaN, congrats on the baby! Hopefully one day my wife and I will be able to have kids.

Have you ever hacked a Classic Controller Pro for the Wii? I don't need the analogs, just the digital buttons. I had a few questions for a project I'm working on. I want to stuff a Wii Remote's guts into the CCP shell and I can't seem to find any info online on what the possible solder points are on the Classic Controller (Pro). Particularly how do you solder where the tact switches are (home, -, +, sync).

Any help would be appreciated! Thanks!

Thanks! No, I have never hacked the classic controller pro. I had someone ask me about one not too long ago, but it never materialized, so I never did it. If you decide to open one up, take some hi-res pictures of the pcb, and I should be able to help you.

tommyinajar · « **Reply #229 on:** January 22, 2013, 06:37:25 pm »

Do you scrape or do anything to the Madcatz contacts at all before you solder? I thought there was a "How to" somewhere but I can't seem to find it.

HaRuMaN · « **Reply #230 on:** January 22, 2013, 08:13:17 pm »

Quote from: tommyinajar on January 22, 2013, 06:37:25 pm

Do you scrape or do anything to the Madcatz contacts at all before you solder? I thought there was a "How to" somewhere but I can't seem to find it.

Nope, the madcatz you don't have to do that.

My old guide:

http://forum.arcadecontrols.com/index.php/topic,64050.0.html

stpcore · « **Reply #231 on:** January 23, 2013, 07:00:05 pm »

My first order of the original XBOX controller hack was perfect! PMed you just now for a couple more! Hope all is well. QUALITY PRODUCT!!!

tommyinajar · « **Reply #232 on:** January 29, 2013, 07:00:39 pm »

Did you ever try a PS3 Madcatz hack? I think they should be the same. They have them for $15 shipped, the xbox 360 ones were OOS.

http://slickdeals.net/f/5818208-Mad-Catz-Street-Fighter-X-Tekken-FightPad-for-PS3-15-each-with-free-shipping-orig-40?p=57218016#post57218016

marioxb · « **Reply #233 on:** January 31, 2013, 05:42:46 pm »

HaRuMan, here is a pic of the Classic Controller Pro PCB.

How much would you charge me to solder wires onto all of the buttons and d-pad? I don't need the analog sticks. I also don't need the other end of the wires connected to anything. I will solder them onto my Wii Remote myself. The only thing I would require is that they are soldered in a way as to where the controller can be reassembled all of the buttons and d-pad would still be usable, and it would LOOK normal from the outside. Thanks.

HaRuMaN · « **Reply #234 on:** February 01, 2013, 08:35:32 am »

Quote from: marioxb on January 31, 2013, 05:42:46 pm

The only thing I would require is that they are soldered in a way as to where the controller can be reassembled all of the buttons and d-pad would still be usable, and it would LOOK normal from the outside.

That would be pretty difficult to do...

What exactly are you trying to accomplish here?

Also, I'm not seeing a picture...

marioxb · « **Reply #235 on:** February 01, 2013, 09:22:36 am »

Sorry, thought I had the picture in there. I fixed the above post now. I want to put the Wii Remote inside of the CCP shell along with the CCP pcb itself so I can have both a "wireless" classic controller, along with the option of using the CCP buttons to control a wii remote only game.

HaRuMaN · « **Reply #236 on:** February 01, 2013, 09:49:24 am »

Quote from: marioxb on February 01, 2013, 09:22:36 am

Sorry, thought I had the picture in there. I added it, but that's the best way I can add it now, since my work blocks MOST sites that have the word "game" in them. I want to put the Wii Remote inside of the CCP shell along with the CCP pcb itself so I can have both a "wireless" classic controller, along with the option of using the CCP buttons to control a wii remote only game.

Ahh. Pretty sure that's beyond my capabilities. Sorry man. $:-\$

marioxb · « **Reply #237 on:** February 01, 2013, 01:23:48 pm »

Hey that's cool. I'll give it a go myself. Now that the pic is finally there, can you give me any pointers as to where I would need to solder? I'm guessing I can just scrape some copper from the dpad and abxy buttons, but I'm not sure how to do that safely. The biggest concern for me though, what method can I try to solder to the -,+ and home buttons in the middle?

HaRuMaN · « **Reply #238 on:** February 01, 2013, 01:47:11 pm »

I can't see the picture (blocked @ work). However, if the contacts are copper, you don't need to scrape, just solder.

As for the +/-/home buttons, if they are the tactile switches, you just need to find the correct leg to solder to (should be 4 legs, 2 are ground, 2 are signal).

I am working on a pair Wii U Pro controllers right now, and have mapped out those PCB's, that's how I'm handling the tactile switches.

(http://www.amazon.com/Nintendo-Wii-U-Pro-Controller-Black/dp/B009AFLXQQ)

jmike · « **Reply #239 on:** February 01, 2013, 03:04:28 pm »

[/quote]

Ahh. Pretty sure that's beyond my capabilities. Sorry man. $:-\$
[/quote]

Beyond your capabilities, I didn't think that was possible.

HaRuMan does great work in case anyone's interested.


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news