Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Where would I find this thing...  (Read 1638 times)

0 Members and 1 Guest are viewing this topic.

elsie

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 22
  • Last login:September 24, 2011, 04:11:35 pm
Where would I find this thing...
« on: January 29, 2008, 09:26:21 am »
Ok, hopefully someone out there will know what I am talking about.

I want to install some items like the power switch, HDMI switch, etc out of view and out of reach of the kids.  So I am thinking that I'd like to install them on a hinged piece of wood behind the marquee that tilts down to reveal the controls.  The type of mechanism that I am looking for is similar to the sunglasses holder that I have in my car.  It closes flush with the ceiling of the car, I push up on it and some sort of spring loaded clasp releases, and the compartment slowly opens.  To close it I just push it shut, and the spring clasp latches it closed.  So, does anyone know where I would get this type of clasp, and what type of hinge or other mechanism would I use to allow it to open slowly rather than just dropping open with a thud.

Thanks

ChadTower

  • Chief Kicker - Nobody's perfect, including me. Fantastic body.
  • Trade Count: (+12)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 38211
  • Last login:October 19, 2022, 12:01:54 pm
Re: Where would I find this thing...
« Reply #1 on: January 29, 2008, 09:28:05 am »

First thought would be to go to a junkyard and pull one from a car.  That would be inexpensive, too.

sstorkel

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 238
  • Last login:November 08, 2011, 09:04:03 pm
Re: Where would I find this thing...
« Reply #2 on: January 29, 2008, 11:31:15 am »
I'd look anywhere that sells woodworking supplies to people who build kitchen cabinets: Rockler, Woodcraft, Woodworker's Hardware, etc. Start with Woodworkers Hardware and look in the "Lid Stays and Supports" category...