Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WTB: donkey kong 4 board pcb  (Read 1770 times)

0 Members and 1 Guest are viewing this topic.

dirt

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 723
  • Last login:October 30, 2024, 08:36:38 pm
WTB: donkey kong 4 board pcb
« on: December 14, 2007, 12:51:58 am »
i need a dk 4 board pcb for a dk i just picked up. anyone have one to sell?
WANTED: NINTENDO CABINETS WORKING OR NOT

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:July 10, 2025, 01:33:58 am
  • There's my post
    • RayB.com
Re: WTB: donkey kong 4 board pcb
« Reply #1 on: December 15, 2007, 07:37:07 pm »
Donkey Kong
Donkey Kong Jr = DK 2
Donkey Kong 3

There is no DK 4
NO MORE!!

shilmover

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 533
  • Last login:September 25, 2018, 12:36:59 am
Re: WTB: donkey kong 4 board pcb
« Reply #2 on: December 15, 2007, 07:45:57 pm »
I believe dirt means the DK 4-board pcb vs the 2-board pcb (cocktail vs upright).
My projects...

Finished:  Stargate (only 'cause I got it that way)
In progress:  Tron, 48-in-1 for School Auction, DKJr (currently a 60-in-1), Millipede, MAME System

dirt

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 723
  • Last login:October 30, 2024, 08:36:38 pm
Re: WTB: donkey kong 4 board pcb
« Reply #3 on: December 16, 2007, 08:23:53 am »
I believe dirt means the DK 4-board pcb vs the 2-board pcb (cocktail vs upright).
yep, i need the 4board version of the dk pcb. the 4board sets were not only used in the cocktails they put some in uprights as well. that is what i have, an upright with dedicated 4board wireing. and just for the record there is:
dk
dk jr
dk3
d2k
 ;D
WANTED: NINTENDO CABINETS WORKING OR NOT

shilmover

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 533
  • Last login:September 25, 2018, 12:36:59 am
Re: WTB: donkey kong 4 board pcb
« Reply #4 on: December 16, 2007, 01:33:11 pm »
So you have the 3 power connectors? (P7, P9, P10) along with all the others (Control, Key, service, sound, monitor)?

If so, a 2-board will also work.  It just does not require the P7 connection to the sound board since the sound board is on one of the two boards.

I went through the same thing, but I can plug in my DKJr 2-board and my DK 4-board into an upright.
My projects...

Finished:  Stargate (only 'cause I got it that way)
In progress:  Tron, 48-in-1 for School Auction, DKJr (currently a 60-in-1), Millipede, MAME System

dirt

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 723
  • Last login:October 30, 2024, 08:36:38 pm
Re: WTB: donkey kong 4 board pcb
« Reply #5 on: December 16, 2007, 05:30:02 pm »
So you have the 3 power connectors? (P7, P9, P10) along with all the others (Control, Key, service, sound, monitor)?

If so, a 2-board will also work.  It just does not require the P7 connection to the sound board since the sound board is on one of the two boards.

I went through the same thing, but I can plug in my DKJr 2-board and my DK 4-board into an upright.
i did not know that. i'll have to check that out since i do have a working 2 board set from my other dk.

WANTED: NINTENDO CABINETS WORKING OR NOT

shilmover

  • Trade Count: (+5)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 533
  • Last login:September 25, 2018, 12:36:59 am
Re: WTB: donkey kong 4 board pcb
« Reply #6 on: December 16, 2007, 07:06:49 pm »
if the ribbon power cable is connected between the 2 boards, just disconnect it first.
My projects...

Finished:  Stargate (only 'cause I got it that way)
In progress:  Tron, 48-in-1 for School Auction, DKJr (currently a 60-in-1), Millipede, MAME System

RayB

  • I'm not wearing pants! HA!
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 11279
  • Last login:July 10, 2025, 01:33:58 am
  • There's my post
    • RayB.com
Re: WTB: donkey kong 4 board pcb
« Reply #7 on: December 18, 2007, 02:59:03 pm »
Ooooooooooooooooooohhhhh!!  :dizzy:
NO MORE!!