Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: So....  (Read 2457 times)

0 Members and 1 Guest are viewing this topic.

ArtsNFartsNCrafts

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:October 12, 2020, 09:22:50 pm
So....
« on: November 04, 2007, 08:41:09 pm »
I just won a donkey kong board off of Ebay for pretty cheap.  Seller said it was tested in a cabinet and worked perfectly.


....what should I do now?

Hoopz

  • Don't brand me a troublemaker!
  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5285
  • Last login:June 13, 2025, 09:18:32 pm
  • Intellivision Rocks!
Re: So....
« Reply #1 on: November 04, 2007, 08:41:37 pm »
Pay for it?   :laugh2:

Matthew Anderson

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 153
  • Last login:September 01, 2020, 04:06:08 pm
  • What does that even mean?
Re: So....
« Reply #2 on: November 04, 2007, 08:47:24 pm »
Send him a bogus cashier's check for the amount + 5000000 dollars and ask for the difference?

 :laugh2:

ArtsNFartsNCrafts

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:October 12, 2020, 09:22:50 pm
Re: So....
« Reply #3 on: November 04, 2007, 08:53:56 pm »
I mean...should I try and sell it and make a profit, or should I now find a cabinet in which to load 'er up?!

If I actually keep it, I'd wanna do a full restoration of some sort...

somunny

  • Trade Count: (+8)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1618
  • Last login:June 17, 2025, 02:49:55 pm
  • Is it hot in here?
Re: So....
« Reply #4 on: November 04, 2007, 08:56:33 pm »
2 weeks later...

I just sold this donkey kong board on Ebay.  Made a nice profit.

....what should I do now?

DaveMMR

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 3244
  • Last login:April 28, 2025, 11:33:13 am
Re: So....
« Reply #5 on: November 04, 2007, 09:34:37 pm »
Do you always buy things impulsively with no idea what you're going to do with it?  I can help you.  Send the board to me, free of charge of course -- ohh, and you pay shipping too -- and you'll be instantly cured of impulse shopping.   ;D
« Last Edit: November 04, 2007, 09:39:43 pm by DaveMMR »

Kangum

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 461
  • Last login:February 25, 2018, 07:46:20 am
Re: So....
« Reply #6 on: November 04, 2007, 10:12:09 pm »
a long time ago someone and thier brother made a pretty nice pair of nintendo cabs. one was donkey kong other was mario brothers i think. 1 blue and 1 orange for his brother. dont have a link but it made you wanna make a nintendo cab thats for sure. i think you should build one of those type of machines. with the dedicated board.


shardian

  • Saint is the evil mastermind
  • Trade Count: (+23)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 9218
  • Last login:August 21, 2015, 03:11:31 pm
  • Friends don't let friends build frankenpanels...
Re: So....
« Reply #7 on: November 04, 2007, 10:17:48 pm »
Define cheap. Odds are you won't make that much. Either way, you would do good to find a machine and sell it as fully tested and working 100%. I have bought more than a few things cheap thinking I will use them. I've made a few dollars reselling from my stockpile, and by a few I mean literally just a few single dollars. Hey they add up though. ;D

ArtsNFartsNCrafts

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:October 12, 2020, 09:22:50 pm
Re: So....
« Reply #8 on: November 04, 2007, 11:35:28 pm »
Wasn't really on impulse.  I thought it through:  I can either A) Sell the thing to someone or B) Make a project of it, and keep it for myself!  Either way is good for me!

SavannahLion

  • Wiki Contributor
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5986
  • Last login:December 19, 2015, 02:28:15 am
Re: So....
« Reply #9 on: November 05, 2007, 02:10:01 am »
If you sell it, make sure you tell 'em it's gilded.

ratzz

  • Guest
  • Trade Count: (0)
Re: So....
« Reply #10 on: November 05, 2007, 03:23:04 am »
Wasn't really on impulse.  I thought it through:  I can either A) Sell the thing to someone or B) Make a project of it, and keep it for myself!  Either way is good for me!

To be fair ANFNC, I think you need to make that decision yourself, or at least look into the projects forum to see what's involved in a restoration.

You only have a relatively tiny part of a full cab though -- a bit like buying a Defender stick and building a cab round it.

I would sell it on to someone who has a cab with a broken board because thats where it'll be most useful.

Good luck  :cheers:

councilface

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
  • Last login:June 28, 2021, 05:21:26 pm
Re: So....
« Reply #11 on: November 05, 2007, 10:00:43 am »
Pretty cheap eh? Are you sure that there isnt some form of white gloop on one of the chips? ;o)

ArtsNFartsNCrafts

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:October 12, 2020, 09:22:50 pm
Re: So....
« Reply #12 on: November 05, 2007, 10:21:51 am »
Wasn't really on impulse.  I thought it through:  I can either A) Sell the thing to someone or B) Make a project of it, and keep it for myself!  Either way is good for me!

To be fair ANFNC, I think you need to make that decision yourself, or at least look into the projects forum to see what's involved in a restoration.

You only have a relatively tiny part of a full cab though -- a bit like buying a Defender stick and building a cab round it.

I would sell it on to someone who has a cab with a broken board because thats where it'll be most useful.

Good luck  :cheers:


Funny hou should mention that, because I found a guy in PA who is selling two DK cabs for about 50 bucks each.  One of them has the wiring harness intact.

Might be the start of a really fun project!

hatrick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 177
  • Last login:January 23, 2020, 12:47:20 pm
  • Big Brother is Watching You!
Re: So....
« Reply #13 on: November 05, 2007, 11:09:15 am »
Problem is, you've bought a board and taken the sellers word that it works 100%. Now you have no way to test it and confirm it works. If you sell it, you can't honestly confirm that it works and say it is 100% working.
A bit of an ethical dilema. Are you prepared to ASSUME it works and sell it to someone who may get screwed?

ArtsNFartsNCrafts

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 221
  • Last login:October 12, 2020, 09:22:50 pm
Re: So....
« Reply #14 on: November 05, 2007, 03:15:00 pm »
Problem is, you've bought a board and taken the sellers word that it works 100%. Now you have no way to test it and confirm it works. If you sell it, you can't honestly confirm that it works and say it is 100% working.
A bit of an ethical dilema. Are you prepared to ASSUME it works and sell it to someone who may get screwed?


sure.

hatrick

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 177
  • Last login:January 23, 2020, 12:47:20 pm
  • Big Brother is Watching You!
Re: So....
« Reply #15 on: November 05, 2007, 04:28:25 pm »
Problem is, you've bought a board and taken the sellers word that it works 100%. Now you have no way to test it and confirm it works. If you sell it, you can't honestly confirm that it works and say it is 100% working.
A bit of an ethical dilema. Are you prepared to ASSUME it works and sell it to someone who may get screwed?


sure.

What's your Ebay ID then so I can put you on my list of people NOT to buy from?

brandon

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 817
  • Last login:June 08, 2025, 02:40:01 pm
  • I <3 arcade games.
Re: So....
« Reply #16 on: November 05, 2007, 08:25:21 pm »
I would say that you should find a way to test the thing before you try to sell it again..  Otherwise, you either A) lie and tell folks that its tested or B) sell it "as is" and not make very much off of it.  You could always buy a Jamma adapter for it and then you can test it out easily and then sell the adapter.  That's of course assuming that you have a way to test JAMMA boards.  or You could always send it to me.. I have TWO DK cabs ;)