Games room ...

[ratzz]

I'd love to see some pics of your games room, if you have one, or where you have your machine located!

I, unfortunately don't have the space, although I'm hoping to convert my attic into an office and locate my 80% cab there. I sometimes get glimpses of peoples games room, and must say that I am insanely jealous !!

COME ON, LET'S SEE 'EM!

[ChadTower]

First piece of advice:  strongly reconsider the thought of an attic as an arcade gameroom.  Horror stories abound about getting cabs into attics.  If you have an easier place to put them, go to lengths to do so.

[SavannahLion]

I sometimes get glimpses of peoples games room, and must say that I am insanely jealous !!

Please don't be jealous. I haven't even started on the game room and I've had to move everything three times. First it was the spare bedroom, which I had to give up. Then it was the second spare bedroom which I had to give up. I tried the garage, but I couldn't lift the cabinet over the floor to ceiling pile of crap that's there now. My cab lives in the shed next to the lawnmower, tiller and table saw. 

I barely have room to work on it right now. 

[shardian]

I'd show you a picture of my "gameroom" garage, but when my non-working games outnumber my working games, its kinda embarrassing. Not to mention the massive piles of junk everywhere.

[Kangum]

I sometimes get glimpses of peoples games room, and must say that I am insanely jealous !!

Please don't be jealous. I haven't even started on the game room and I've had to move everything three times. First it was the spare bedroom, which I had to give up. Then it was the second spare bedroom which I had to give up. I tried the garage, but I couldn't lift the cabinet over the floor to ceiling pile of crap that's there now. My cab lives in the shed next to the lawnmower, tiller and table saw. 

I barely have room to work on it right now. 

thats horrible. your cab was demoted right out of the house into the yard. 

[ChadTower]

I'd show you a picture of my "gameroom" garage, but when my non-working games outnumber my working games, its kinda embarrassing. Not to mention the massive piles of junk everywhere.

I'm always nonworking games outnumbering working ones... I buy them all nonworking, almost.  I have bought few working ones.  Right now, though, all of my pins are taken down and stored so I can work on finishing the basement. 

[shardian]

I'm always nonworking games outnumbering working ones... I buy them all nonworking, almost.  I have bought few working ones.  Right now, though, all of my pins are taken down and stored so I can work on finishing the basement. 

Like I always say: "Whatever I have to do to get them in the door."

Wife is okay with me bringing home a piece of junk for next to nothing, in which I have to invest money and time to get working. If I try to even mention a nice machine, its a hell no due to price. Nevermind that the fixer uppers end up costing a much as the ready to go ones, or the fact that I spend time fixing them.

[Jeff AMN]

Mine is still a work in progress, but it will be done later this week when I finish putting on the new baseboard (tonight) and have the carpet installed in a few days.





Here's what it used to look like when we bought the house:



The pictures make it look small, but there's enough room for 20 cabs or so and about 4 or 5 pins. I only have a handful of cabs and two pins, so I'm good for quite some time.

Edit: You can't see the walk-in closet, but it's actually big enough for another 4 or 5 cabs and has two electrical outlets inside. I don't plan on sticking cabs in there at this point since I don't lack the room right now. I'll probably use it to store PCBs, MVS carts, parts, and tools. I took the shelving out when I painted it, so I can put something a bit more custom in this time around.

[ChadTower]

Wife is okay with me bringing home a piece of junk for next to nothing, in which I have to invest money and time to get working. If I try to even mention a nice machine, its a hell no due to price. Nevermind that the fixer uppers end up costing a much as the ready to go ones, or the fact that I spend time fixing them.

You're into pins now.  The upper end "nice cabs" are the "fixer upper" prices now for the lesser titles... think 2x-3x for a top title.  Gotta come up with a new strategy for the wife.

[shardian]

You're into pins now.  The upper end "nice cabs" are the "fixer upper" prices now for the lesser titles... think 2x-3x for a top title.  Gotta come up with a new strategy for the wife.

Heh, I showed her the Futurama customized pin project and told her we could do the same thing in something she wanted it done. That did the trick. Judging by the way I get projects done, I'll get around to customizing it in...oh... sometime after I retire.

[CheffoJeffo]

I'd show you a picture of my "gameroom" garage, but when my non-working games outnumber my working games, its kinda embarrassing. Not to mention the massive piles of junk everywhere.

Heh -- my gameroom resembles that remark!

[Jeff AMN]

The lack of pics is disturbing...

C'mon people, show them pics!

[arcadefever]

i have a few GR on my site, from other collector:

http://www.arcadefever.net/ARCADEROOMS.html

 

[divemaster127]

I will shoot some pics & get posted, my gameroom is "ok" not like saints now that is a awesome game room
dm

[nate1749]

anyone have any more pictures?

[Virgil Tracy]

Here are few of my room before I increased the size and collection

[Jeff AMN]

Oh man, I love that Ridge Racer...

[Q*Bert_OP]

Here is my game room:

[Jeff AMN]

Nice pins!

I have Jurassic Park and The Simpsons. I'd love to add one or two more to the collection, but I haven't seen any must-haves pop up lately in my area.

[Virgil Tracy]

Oh man, I love that Ridge Racer...

The ridge racer is an empty cab I hooked up to my dreamcast to play Daytona, so my daytona machine owes me $30

[Guaranos]

Here's mine:  http://jhanson.com/arcade/gameroom.html

I chose a space theme for this room.  It's not filled to the brim with games (just one arcade machine and one pinball), but it leaves enough room for DDR, 4-player Wii games, a couch, and a chair.  I could comfortably fit in one more stand-up arcade machine and a cocktail cabinet, and still have room for all that, but I haven't found the need to yet.

[FrizzleFried]

These shots were taken a couple weeks ago.  Since then the Turbo Outrun has left the building as well as the blue "MAME" cabinet in the first photo.  The Rampage: World Tour at the end is becoming my MAME horizontal cabinet.... and I now have an Xmen vs Streetfighter housed in an early 90's Atari cabinet (with a Marvel Superheros vs Streetfighter marquee and a Marvel vs Capcom instruction card...the guy I got the cabinet from is a pure genius I tell ya!)

[missioncontrol]

A little old but here's what it did look like a few months ago. The Commodore 64 has been moved to make way for the network laser printer, and the consoles have been moved around a bit.

[ChadTower]

Nice touch on the Telegames 6 switch rather than a standard 2600.

[XyloSesame]

Sweet Sixer - glad to see her hooked up and running...

[missioncontrol]

Nice touch on the Telegames 6 switch rather than a standard 2600.

Thanks,  my vader 2600's and woody 2600's are inside the blue box until I can figure out a better place to display them

[JackTucky]

Mission doesn't have a mame cab!

=J

[missioncontrol]

Mission doesn't have a mame cab!

=J

 

nope, still sitting in my shed waiting for me to do stuff

[ChadTower]

That's not the shed you were going to build out of leftover pallets, is it?

[missioncontrol]

That's not the shed you were going to build out of leftover pallets, is it?

hope, still haven't gotten around to it yet....

[ChadTower]

hope, still haven't gotten around to it yet....

Get on it, bro.  You have one now.

[missioncontrol]

hope, still haven't gotten around to it yet....

Get on it, bro.  You have one now.

would love to, but too much other crap has taken precedence over it right now....

[Guaranos]

Here's mine:  http://jhanson.com/arcade/gameroom.html

I chose a space theme for this room.  It's not filled to the brim with games (just one arcade machine and one pinball), but it leaves enough room for DDR, 4-player Wii games, a couch, and a chair.  I could comfortably fit in one more stand-up arcade machine and a cocktail cabinet, and still have room for all that, but I haven't found the need to yet.

Dude, why did you paint the pinball cabinet BLACK?!

I'd smack you across the face if I could. 

I must say, your threats are a bit uncalled for.  I'm kind of surprised that Saint and the mods put up with that kind of talk in the Main Forum. 

But anyway, if you must know, the pinball cabinet had about 25% of the vinyl sticker still left on it, and had been poorly spray painted black.  It also had deep gouges in it.  So, I removed the remaining 25% of the sticker, sanded it, repaired the gouges, and painted it.  If I could find the Bally-Midway sticker that goes on it, I would get one (assuming it wasn't outrageously priced), but they're not easily found, unfortunately.  The Ballys from this era (6803 mpu) aren't exactly collectible, so nobody makes repro materials for them. 

As for Chad's question, it's a MotorDome.  It's a 1986 Bally-Midway machine, not especially popular, but has a nice 1,000,000 shot up a difficult ramp on it.

[saint]

Carry on...

[Havok]

But anyway, if you must know, the pinball cabinet had about 25% of the vinyl sticker still left on it, and had been poorly spray painted black.  It also had deep gouges in it.  So, I removed the remaining 25% of the sticker, sanded it, repaired the gouges, and painted it.  If I could find the Bally-Midway sticker that goes on it, I would get one (assuming it wasn't outrageously priced), but they're not easily found, unfortunately.  The Ballys from this era (6803 mpu) aren't exactly collectible, so nobody makes repro materials for them. 

Here's a vector of the cabinet art:

http://www.localarcade.com/arcade_art/r1015.search.htm

Boring... I would just stick with the black...

[Guaranos]

But anyway, if you must know, the pinball cabinet had about 25% of the vinyl sticker still left on it, and had been poorly spray painted black.  It also had deep gouges in it.  So, I removed the remaining 25% of the sticker, sanded it, repaired the gouges, and painted it.  If I could find the Bally-Midway sticker that goes on it, I would get one (assuming it wasn't outrageously priced), but they're not easily found, unfortunately.  The Ballys from this era (6803 mpu) aren't exactly collectible, so nobody makes repro materials for them. 

Here's a vector of the cabinet art:

http://www.localarcade.com/arcade_art/r1015.search.htm

Yeah, I've seen that before.  It's close, but not quite it.  From pictures I've seen of the full art, on MotorDome it's supposed to be orange instead of pink.  What was left on mine confirmed that, except that it was faded a bit more yellowish than the other pictures I've seen.

Quite frankly, it's not worth the $90 to me to put close-but-not-quite-it artwork, and boring artwork at that, on a sub-$300 pinball machine.  I've spent more than that on playfield parts, but those are worth it to me since they impact game play.

[HaRuMaN]

Carry on...

Hey... who chopped out my post?    LoL...  I knew it was bound to happen.

Anyway, back on topic, no gameroom yet, my MK cab sits in my living room so far.  Our thrid bedroom is doubling as storage space at the moment, thats originally where I wanted my gameroom to go.  Once we can clear it out, it's gonna become a guest bedroom.  I need more room! 

[heffe2001]

A little old but here's what it did look like a few months ago. The Commodore 64 has been moved to make way for the network laser printer, and the consoles have been moved around a bit.

Wish I'd have kept my Space Shuttle pinball machine, still have the little topper marquee tho .  Need to find a decent pin at a decent price locally to me, that's all I'm missing from what I want in my 'room'...  Well, that, and a nice cocktail machine .

[Malenko]

I finally got Chad's kids to leave, so here ya go , the best money shot I can take




the irony of running UMK3 right next to UMK3.
I may pick up an MK1 machine today, and yes thats an MK4 CP on the ground, the game sucked but I actually really like the art (namely the 4 turning into a sword)


heres an old shot that makes me laugh.

[Level42]

I'm currently investigating my options. My ultimate dream is this:

http://www.mombargbeton.nl/pages/mombargbeton.php

http://www.mombargbeton.nl/pages/referenties_view.php?id=4

(All in Dutch, but I guess you get the piccies)

It would be a prefab "cellar/basement". Here in Holland houses rarely have basements because large parts of the country are very wet clay land. We need to use piles to build anything. This would be installed in my garden. Will need some digging Not sure if it's possible/payable for me here...

But I really do need a place to put my Atari Dominos, Pleiads Cocktail, Galaxian, Centipede, Mario Bros., Star Wars Cockpit, Konami GT Cockpit and Mame cab !