Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Testing a Golden Tee  (Read 1403 times)

0 Members and 1 Guest are viewing this topic.

tristan

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 187
  • Last login:October 07, 2022, 05:37:32 pm
  • I have no idea what's going on
    • Nothing
Testing a Golden Tee
« on: August 03, 2007, 10:37:52 am »
I recently acquired a Golden Tee Fore 2005 game (guts only) and I would like to test it out. Does anyone know if it is safe to plug into a standard JAMMA game? It says it is JAMMA, but the power is not connected via the JAMMA plug. I'm just trying to verify the board powers on and boots at this point, not play the game, and I don't want to fry it.
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Testing a Golden Tee
« Reply #1 on: August 03, 2007, 11:40:48 am »
Here is a link to the manual.  How you apply power depends on if you have the red board or the green board.   I do would not plug into a jamma harness with another PS on it.  Connect the power as recommended by the manual.

http://www.shafferdistributing.com/manuals/its_Golden%20Tee%20Fore!%20Manual.pdf
Logged

tristan

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 187
  • Last login:October 07, 2022, 05:37:32 pm
  • I have no idea what's going on
    • Nothing
Re: Testing a Golden Tee
« Reply #2 on: August 03, 2007, 01:50:53 pm »
I have the manual, and it is a green board. Does anyone actually know if plugging it into a standard JAMMA will harm it?
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Testing a Golden Tee
« Reply #3 on: August 03, 2007, 10:55:29 pm »
It says right in the manual not to supply power via the jamma connector.

"Because of current consumption, your Golden Tee Fore!
machines will perform best if power is safely re-routed
around the JAMMA connector"

The board uses more power than the jamma connected power can safely provide.
Logged
Pages: [1]
  
Go Up
« previous next »