Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Control Panel Overlay Question  (Read 911 times)

0 Members and 1 Guest are viewing this topic.

LiquidFire

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 52
  • Last login:February 11, 2022, 09:22:19 pm
Control Panel Overlay Question
« on: July 22, 2007, 03:43:31 am »
How thick is the *thickest* custom overlay material you can get? Seems from what I have been reading here, some are pretty thin and unforgiving as far as imperfections in the underlying cp substrate.

I am concerned that even though my cp parts, such as the joystick plate and trackball plate, will be 'flush', the overlay material may show the mountings anyway if not thick enough.

I will sand and fill and even primer the cp before covering, but I want to see *nothing* in the overlay where it should not be. :banghead: