Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: t-molding router bit?  (Read 2398 times)

0 Members and 1 Guest are viewing this topic.

skirge66

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 03, 2003, 06:25:58 am
  • the stupid will normally punish themselves
t-molding router bit?
« on: April 24, 2003, 04:39:02 am »
Is there a spacific name for the router bit used for cutting the trench for t-molding? where is a good place to get them? I asked at home depot about t-molding, and they looked at me like I had a 3rd eye...I would assume they do not carry the bit either.  I know this is a remedial question, and probably has been asked before and i do appologize.

I will be using 3/4" t-molding. thanks for the help
skirge66

Diplomacy is the art of saying "nice doggy" until you find a bigger rock to throw

rampy

  • *shrug*
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2910
  • Last login:March 02, 2007, 11:32:16 am
  • ...as useless as a JPG is to Helen Keller
    • Build Your Own PVR
Re:t-molding router bit?
« Reply #1 on: April 24, 2003, 10:04:02 am »
http://www.t-molding.com    sells the bit to go along with their t-molding...

I got my 1/16" slot cutting bit from http://www.mlcswoodworking.com/


here's a previous thread with more info

*shrug*

rampy

skirge66

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 181
  • Last login:June 03, 2003, 06:25:58 am
  • the stupid will normally punish themselves
Re:t-molding router bit?
« Reply #2 on: April 24, 2003, 03:30:38 pm »
thanks again rampy...you seem to always come through with the useful link and useful threads, maybe with a little luck some day i will know these boards as well as you.

if you're ever in arizona i'll buy you some beers, thanks again.
skirge66

Diplomacy is the art of saying "nice doggy" until you find a bigger rock to throw