Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: T-Molding Slot Width  (Read 1895 times)

0 Members and 1 Guest are viewing this topic.

gajaman

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 137
  • Last login:July 19, 2011, 02:50:33 pm
  • The GajaCab is here......
    • The Gaja Project
T-Molding Slot Width
« on: April 24, 2003, 03:30:18 am »
I am trying to determine the width of cut required for t-molding so I can buy a cutter locally.

The slot cutter on T-Molding.com has a kerf of of 0.075". Is the kerf the depth of cut or width? and how much is 0.075" in metric? I've tried to convert to metric but work out that 0.075" is about the thickness of a piece of paper!

Help!!
Logged

VMJ Team

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 465
  • Last login:July 09, 2007, 09:29:50 am
    • Virtual Music Jukebox
Re:T-Molding Slot Width
« Reply #1 on: April 24, 2003, 08:58:19 am »
The cutter is most likely 1/2" deep...the 0.075 is the width(thickness) of the cutting blades...so 0.075" x 25.4 (mm conversion) = 1.905 mm
Logged

CitznFish

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 831
  • Last login:November 13, 2024, 01:18:45 am
  • www.subvertcity.com - Prof. Strength Slackwear
Re:T-Molding Slot Width
« Reply #2 on: April 24, 2003, 05:55:47 pm »
1/16 is the width.  you can convert that to metric.
Logged

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re:T-Molding Slot Width
« Reply #3 on: April 24, 2003, 06:06:30 pm »
Sorry I am a bit confused.  

If 1/16 is the size then it equals .0625 inch

.075 is not equal to 1/16.

Which one is right?

BobA
Logged

CitznFish

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 831
  • Last login:November 13, 2024, 01:18:45 am
  • www.subvertcity.com - Prof. Strength Slackwear
Re:T-Molding Slot Width
« Reply #4 on: April 24, 2003, 06:42:57 pm »
1/16 slot cutter bit is what's used for T-Molding.

http://www.coastaltool.com/cgi-bin/SoftCart.exe/a/ab/aman/slotting.htm?L+coastest+dkxv1470ff213621#cart


first item listed

there are other online suppliers as well
Logged
Pages: [1]
  
Go Up
« previous next »