Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: 20ez Mating Video Connector  (Read 913 times)

0 Members and 1 Guest are viewing this topic.

2600

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1630
  • Last login:June 05, 2017, 10:20:56 am
  • I want my own arcade controls!
20ez Mating Video Connector
« on: July 12, 2007, 02:51:48 pm »
Just got one of these in (Thanks leapinview) to use for testing. 

Anyone know the mating connector for the Sanyo 20EZ video-connector?

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:November 11, 2018, 03:00:41 pm
    • Me on Myspace
Re: 20ez Mating Video Connector
« Reply #1 on: July 13, 2007, 02:05:37 am »
mating connector ?

Not sure exactly where you mean by this......

Are you using the inverter board or not?
Will you be running a Nintendo game?

A typical installation would have a video signal cable going into the inverter board and then from there a ribbon type cable to the main chassis. (same connector on either cable)

Like so: http://www.mikesarcade.com/cgi-bin/store.pl?sku=MONCBLNIN
Not a technician . . . . just a DIY'er.

2600

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1630
  • Last login:June 05, 2017, 10:20:56 am
  • I want my own arcade controls!
Re: 20ez Mating Video Connector
« Reply #2 on: July 13, 2007, 08:28:35 am »
This is why I really am not good at talking on the forums, I can never word anything correctly.

On the Monitor PCB there is a 6 pin connector for RGB, Sync, and GND.  If you want to use the monitor, you have to plug a cable into this 6 pin connector.  The cable will have a connector on it that "mates" with the connector on the monitor PCB.

I didn't get a chance to look at it last night, but IIRC it looks like a .100 pitch connector.  Once I lookup and order the correct connector, I'll post the info for future reference.

Ken Layton

  • Guru
  • Trade Count: (0)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 6883
  • Last login:Yesterday at 11:14:31 pm
  • Technician
Re: 20ez Mating Video Connector
« Reply #3 on: July 13, 2007, 12:13:38 pm »
Here's what you're looking for from Mouser Electronics (www.mouser.com):

# 538-22-01-3067 Molex KK .100" crimp terminal housing only

# 538-08-50-0114 Molex KK .100" crimp pins (needed for above to insert in the housing)

Remove the "538-" to get the actual Molex part number. You can also buy these from Bob Roberts.

2600

  • Trade Count: (+7)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1630
  • Last login:June 05, 2017, 10:20:56 am
  • I want my own arcade controls!
Re: 20ez Mating Video Connector
« Reply #4 on: July 13, 2007, 01:35:55 pm »
Thanks Ken.  Making a few other cables and wanted to get this in with my order.

Kevin Mullins

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 4504
  • Last login:November 11, 2018, 03:00:41 pm
    • Me on Myspace
Re: 20ez Mating Video Connector
« Reply #5 on: July 13, 2007, 02:38:24 pm »
My next step would have been Bob Roberts..... but Kens the man with all them fandangled part numbers and such.  ;D
Not a technician . . . . just a DIY'er.