Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Some dimensions needed for Donkey Kong Cabinet  (Read 5997 times)

0 Members and 1 Guest are viewing this topic.

geforcemx

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:July 06, 2008, 06:03:14 am
Some dimensions needed for Donkey Kong Cabinet
« on: June 10, 2007, 08:02:56 am »
I'm building a Donkey Kong Cabinet using the plans from Jakobud.com. Problem is, I don't have the dimensions for the placement of the monitor.

Can someone fill in the dimensions for the image I included. Just use the letters I have laid out.
« Last Edit: June 11, 2007, 11:29:51 am by geforcemx »

rockin_rick

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 495
  • Last login:May 27, 2017, 09:20:20 am
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #1 on: June 10, 2007, 02:14:11 pm »
Welcome, first time poster.  Please don't use imageshack for your pics.  You can simply attach them to your post.  Click on additional options...

Sorry, I don't know your answer, but this will bump you if nothing else.

Rick
If I do not respond to your post in a timely manner, feel free to PM me.

geforcemx

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:July 06, 2008, 06:03:14 am
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #2 on: June 11, 2007, 11:33:01 am »
Quote
Welcome, first time poster.  Please don't use imageshack for your pics.  You can simply attach them to your post.  Click on additional options...
I was looking for it but couldn't find it. I just fixed it now that I know were its at, thanks.

Do you know anyone that has a DK cabinet? I just need someone who has one to take a few measurements.

Jeff AMN

  • Trade Count: (+3)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 1213
  • Last login:July 25, 2017, 05:26:24 pm
    • Gamer Theory
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #3 on: June 11, 2007, 11:42:15 am »
I have a DK. I'll try to get some measurements for you tonight if I can get around to it.
http://www.CoinOpShippers.com - The lowest rates on pinball and arcade shipping in the USA.
.
http://GamerTheory.com - Video Game News, Reviews, Editorials, and Contests
.
http://www.thepinballpodcast.com/ - The Pinball Podcast - Two Pinheads Talking Pinball
.

geforcemx

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:July 06, 2008, 06:03:14 am
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #4 on: June 11, 2007, 01:25:20 pm »
Quote
I have a DK. I'll try to get some measurements for you tonight if I can get around to it.
Thanks, I would realy appreciate it.

BobA

  • Trade Count: (+14)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 5943
  • Last login:July 11, 2018, 09:52:14 pm
  • What Me Worry?
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #5 on: June 13, 2007, 05:04:27 pm »
These measurements were taken on my DK jr cab with a metal yardstick.  Should be the same.

a 4.5 inches
b 4.25 inches
c 14.5 inches
d 21.25 inches
e 34.5 inches

Note: E was a ---smurfette---.  I could not get to the front of the cab so had to extend D to the back of the cab and measured at the back.


Hope that helps.

geforcemx

  • Trade Count: (0)
  • Jr. Member
  • **
  • Offline Offline
  • Posts: 8
  • Last login:July 06, 2008, 06:03:14 am
Re: Some dimensions needed for Donkey Kong Cabinet
« Reply #6 on: June 13, 2007, 06:09:34 pm »
Thank you very much ;D

I can continue building my cabinet now that I have those dimensions.
« Last Edit: June 13, 2007, 06:12:07 pm by geforcemx »