Author Topic: FS/FT List - $5 Control Panels - you pick (Read 3653 times)

asmida · « **on:** June 05, 2007, 11:07:42 am »

This will be my BST thread list -

Looking to sell via Paypal. If you don't like my prices - counteroffer. The worst I'll do is say no.

These control panels should be repaired/holes filled/new cpos put on, etc...

PRICES ARE AS FOLLOWS: ANY CONTROL PANEL $5 plus Actual Shipping VIA USPS PARCEL POST with Delivery Confirmation from 13452

All measurements are approximate...Doing the best I can..If I am a hair off, don't blame me.

asmida · « **Reply #1 on:** June 05, 2007, 11:09:08 am »

Control Panel 1

Generic SNK

24 7/8" x 9" x1"

7lbs shipping weight

asmida · « **Reply #2 on:** June 05, 2007, 11:10:25 am »

Control Panel 2

Tiger road

22 3/4" x 7 1/2"

6lbs shipping weight

asmida · « **Reply #3 on:** June 05, 2007, 11:11:49 am »

Control Panel 3

Double Dragon

23 1/8 x 9 3/16

7 lbs shipping weight

asmida · « **Reply #4 on:** June 05, 2007, 11:24:09 am »

Control Panel 4

Unknown

22 3/4" 6 3/4" x 4

9lbs shipping weight

asmida · « **Reply #5 on:** June 05, 2007, 11:27:42 am »

Control Panel 5

Mania Challenge?

23 15/16" x 8" x 3"

10lbs shipping weight

asmida · « **Reply #6 on:** June 05, 2007, 11:29:43 am »

Control Panel 6

Unknown

23 3/4" x 7" x 7.5"

11lbs shipping weight

asmida · « **Reply #7 on:** June 05, 2007, 11:32:16 am »

Nintendo VS. Unisystem Control Panel Populated

$30 shipped to Continental US

Edit - Sold

asmida · « **Reply #8 on:** June 05, 2007, 11:33:11 am »

Control Panel 7

Sky shark conversion of Trackball game

23 3/4" 6 3/4" x 9 3/4"

11lbs shipping weght

asmida · « **Reply #9 on:** June 06, 2007, 09:48:23 am »

Control Panel 8

Street Fighter II conversion of unknown williams game

24 3/8" x 6 3/4" x 8 1/2"

8 lbs shipping weight

Edit Sold

asmida · « **Reply #10 on:** June 07, 2007, 10:47:12 pm »

~~Small coin door - well coin insert - Includes mech, perfect for bartop..~~

Edit - Sold

asmida · « **Reply #11 on:** June 08, 2007, 01:31:30 pm »

Rolling Thunder JAMMA PCb - Tested Working

$50 Shipped to Continetal US

Edit - Removed

leapinlew · « **Reply #12 on:** June 08, 2007, 02:21:11 pm »

PM sent on the WICO 4 ways and 8 ways

asmida · « **Reply #13 on:** June 08, 2007, 03:50:24 pm »

WICO 4 Ways and 8 ways still available.

asmida · « **Reply #14 on:** June 08, 2007, 11:21:48 pm »

Wicos have been moved to different thread

asmida · « **Reply #15 on:** June 08, 2007, 11:23:11 pm »

Nintendo Joysticks

$20 for Pair shipped to Continental US

Moved to my joystick thread

asmida · « **Reply #16 on:** June 08, 2007, 11:24:20 pm »

I also have buttons and leafs available.

asmida · « **Reply #17 on:** June 09, 2007, 10:50:35 pm »

~~Playstation 2 with cords, 1 controller, multitap, 1 memory card, and Tekken 4 game.~~

Sold

Encryptor · « **Reply #18 on:** June 09, 2007, 11:36:31 pm »

There is some DK stuff on Ebay

DK Marquee - http://tinyurl.com/3yk9ju

Whole Conversion Set - http://tinyurl.com/2vs3jv

Hope this helps.

Encryptor

asmida · « **Reply #19 on:** June 10, 2007, 12:01:06 pm »

I also have a coin door thread

asmida · « **Reply #20 on:** June 11, 2007, 03:43:39 pm »

Doesn't anyone have any Defender parts?

Encryptor · « **Reply #21 on:** June 11, 2007, 10:05:07 pm »

I don't know how you feel about Ebay but there is some Defender stuff on there as well as the DK stuff.

Encryptor

asmida · « **Reply #22 on:** June 12, 2007, 09:18:35 am »

Quote from: Encryptor on June 11, 2007, 10:05:07 pm

I don't know how you feel about Ebay but there is some Defender stuff on there as well as the DK stuff.

Encryptor

I love Ebay - Just Can't find good Defender Stuff on there.

I'm specifically looking for Control Panel Overlays for DK and Defender, Stencil kit for Defender, marquee for Defender, DK Sideart, and Bezels for Both (I know there are vendors that sell these and I saw the Defender Marquee on Ebay - I was just hoping to trade for them)

By the way - I've added prices and some new stuff - removed some stuff that no one seemed to have any interest in.

Open for other trades as well - Send me a message...

Encryptor · « **Reply #23 on:** June 12, 2007, 03:44:18 pm »

Did you look at the whole DK conversion set link I posted earlier? It has the CPO, bezel and marquee plus the pcb and t-molding.

Encryptor

asmida · « **Reply #24 on:** June 13, 2007, 08:27:02 am »

Sold the mag sticks

lanman31337 · « **Reply #25 on:** June 13, 2007, 12:34:02 pm »

bump for a great seller, i got 2 coin doors off of him, excellent guy, and his prices are very reasonable.

asmida · « **Reply #26 on:** June 14, 2007, 11:48:26 am »

Lowered Some of my prices!

asmida · « **Reply #27 on:** June 15, 2007, 09:03:39 am »

VS CP Sold.

No one is interested in the Wicos?

Are my prices too high?

shardian · « **Reply #28 on:** June 15, 2007, 09:49:35 am »

Quote from: asmida on June 15, 2007, 09:03:39 am

No one is interested in the Wicos?

Are my prices too high?

For the shape they appear to be in, yes your prices are high. If you took out the grommets to verify their shape, it may help ( or not if in fact the grommets are busted as I suspect). The fact that Ponyboy has sold out of grommets has made used wicos a risky venture.

If the grommets are intact/ in fairly good condition, you could maybe get $20 shipped. Personally, I have sold used/non restored wicos for around $10 in the past.

asmida · « **Reply #29 on:** June 16, 2007, 04:33:29 pm »

I dont think they are perfect, but I dont think they are that bad..

I'll sell them for $15 shipped.

Moved them to my joystick thread though, but I will include a pic of the grommets here.

asmida · « **Reply #30 on:** June 16, 2007, 09:42:43 pm »

Control Panel 9

asmida · « **Reply #31 on:** June 19, 2007, 10:09:36 am »

I have a ton of Metal Control Panels for $5 each plus actual shipping. Most are about 24" wide. If you dont see something you want, ask.

Unfortunately I do not have any dynamo cut corner control panels.

MameMaster! · « **Reply #32 on:** June 19, 2007, 02:48:50 pm »

You have PM!...thanks for a very helpful post of stuff for sale!


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news