Author Topic: Mameroom Bartop Kit (Read 1141 times)

stephenp1983 · « **on:** May 29, 2007, 07:42:24 pm »

Does anyone know the approximate measurements of the control panel area? I was thinking about ordering one, and wanted to maybe design some artwork for it.

stephenp1983 · « **Reply #1 on:** May 29, 2007, 08:23:56 pm »

Would a mod please move this to the main forum I didn't mean to post it here.

BobA · « **Reply #2 on:** May 29, 2007, 11:36:21 pm »

Going by the profile and specs which gives the depth as 27 inches I would estimate the depth of the CP to be about 7.5 and the width to be 16.25 inches which is given as the monitor opening width.

Product Specifications
Overall Cabinet Width: 17 1/2"
Overall Cabinet Height: 27 1/4"
Overall Cabinet Depth: 27"
Monitor Opening Width: 16 1/4"
Monitor Opening Height: 14"
Monitor Opening Depth: 13 3/4" sloped to 18 1/2"
Cabinet Finish: Black Melamine


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Mameroom Bartop Kit (Read 1141 times)

stephenp1983

Mameroom Bartop Kit

stephenp1983

Re: Mameroom Bartop Kit

BobA

Re: Mameroom Bartop Kit