Author Topic: Just another hurddle (Read 1136 times)

Jake · « **on:** May 04, 2007, 10:49:03 am »

I've gotten my cab put back together. My arcadeVGA installed and working fine on my computer monitor. I go to hook it up to my arcade monitor and nothing happens. Increased the screen voltage on the flyback and got some kind of picture but it's just green bars and static. I tried tweaking the H and V potentiometers but didn't seem to affect anything. I'm not sure if this just needs tweaking or the signal just isn't getting through. Any thoughts?

Chris G · « **Reply #1 on:** May 04, 2007, 11:09:57 am »

Hopefully you didn't damage something when you had it wired up incorrectly. You might want to post this type of thing in the monitor/video forum...

Chris

Jake · « **Reply #2 on:** May 04, 2007, 11:24:26 am »

Moved


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news

Author Topic: Just another hurddle (Read 1136 times)

Jake

Just another hurddle

Chris G

Re: Just another hurddle

Jake

Re: Just another hurddle