Someone reccomend me a place in the USA to fix a Sharp 33" KTM-F33 chassis

[Frankiebonez]

Like the above states.  I want to send the chassis out to have it benched and freshened up.  Anywhere in the USA would be ideal, Zax amusements works on them apparently but I really would like to avoid shipping to Austrailia. 

Thanks for any help!

[Ken Layton]

That's a Kortek chassis. www.casinotech.com is the authorized Kortek repair center.

[shorthair]

And since you now know the manufacturer, there might be more than one service center, and perhaps one closer than another.

[Kevin Mullins]

There's also individuals like Chad Entringer that works on monitors as a service....

http://www.arcadecup.com/

[Frankiebonez]

There's also individuals like Chad Entringer that works on monitors as a service....

http://www.arcadecup.com/

I tried Chad but unfortunately he doesnt work on this model of chassis

[Frankiebonez]

That's a Kortek chassis. www.casinotech.com is the authorized Kortek repair center.

Is Kortek a Sharp brand?  Whats the difference between Sharp and Kortek or are they the same?  Sorry just a bit confused and curious.

[Ken Layton]

Is Kortek a Sharp brand?  Whats the difference between Sharp and Kortek or are they the same?  Sorry just a bit confused and curious.

Kortek made monitors for several companies. Sharp Image used both Kortek (primarily) and Sony as their monitor suppliers.

Kortek would rebrand/relabel monitors for a particular customer. The "KT" (or in your case "KTM") indicates a Kortek model number.

Happ Controls repairs all makes/models of arcade & gambling video monitors at their monitor repair shop in Las Vegas. Casino Tech is also in Nevada.

There's another Kortek repair shop at http://gamingstuff.com/displays.asp

[Frankiebonez]

OK cool   I noticed that KT in front of the name, and that also Kortek had the same first 2 letters in all there model numbers.  I'll contact these locations see if I can get anywhere... thanks alot!

[Rickn]

Not sure how you are makng out??

As far as repair goes, we shy away from a number of breeds "Kortek" and "Neotec" on the top of the list..

If you get desperate, we have recently supplied 3 0r 4 customers with replacement boards for 32/34" Sharp monitors.

But first you must be very confident your tube and yoke is good.

If so look on the tube and yoke for part #'s  as well as manufacturer.

Tube numbers will start with A79 or A80- if you can give me a manufacturer.

Yoke numbers - if Thompsom 79L....

I will cut it short here in case you have already repaired your board.

In any case good luck

Rick Nieman
Nieman Video Displays
www.niemandisplays.com
Rick@niemandisplays.com
519-621-1722

[Domolover]

I also have this arcade monitor ktm-f33, do i need the AC isolation for  this monitor?
thanks guys for your help !