Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Removing paint from existing cAB  (Read 834 times)

0 Members and 1 Guest are viewing this topic.

urbecrisch

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 597
  • Last login:March 30, 2025, 01:11:38 pm
  • I was the S**T back in '82
Removing paint from existing cAB
« on: April 17, 2007, 07:25:08 pm »
What is the preferred method of some of you out there regarding old paint on a CAB.

1. Sand, prime, and then repaint
2. Repaint. F*** the sanding & priming
3. Use paint remover, prime, then paint
4. ? Other suggestions

I'm thinking of using paint remover but I'm not sure it's worth it.  If that is not advised I will sand, prime, and repaint. 

Cheers!

leapinlew

  • Some questionable things going on in this room with cheetos
  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7919
  • Last login:July 27, 2025, 11:06:50 am
Re: Removing paint from existing cAB
« Reply #1 on: April 17, 2007, 07:52:43 pm »
1