Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Recommendations for attaching adhesive CPO  (Read 901 times)

0 Members and 1 Guest are viewing this topic.

Osirus23

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 849
  • Last login:August 23, 2021, 01:33:52 pm
Recommendations for attaching adhesive CPO
« on: April 12, 2007, 10:50:29 pm »
I ordered a control panel overlay frome MAMEMarquees yesterday for my cab build. I ordered the overlay with the adhesive back. The FAQ on their site says that the adhesive doesn't stick well to bare MDF, but is kinda vague on what to use. If anyone here has ever mounted one of their Control Panels/Side Art I'd like to know what you coated the MDF with first so it sticks well.
Logged

flashdog

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 29
  • Last login:February 18, 2012, 06:10:58 pm
Re: Recommendations for attaching adhesive CPO
« Reply #1 on: April 13, 2007, 12:55:56 am »
Use a good sealer-primer and then don't depend on just the adhesive on the overlay, get some 3M Hi-Strength 90 spray adhesive and lightly coat both surfaces. Of course it wouldn't be that big an issue if you're putting  polycarb  on over your C.P. flash.
Logged
Pages: [1]
  
Go Up
« previous next »