Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news


  

Author Topic: Almost done with my first cabinet!!  (Read 1321 times)

0 Members and 1 Guest are viewing this topic.

Chad

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 41
  • 'There's no place like 127.0.0.1' :thinkgeek.com
    • Chad's Invasion Site
Almost done with my first cabinet!!
« on: April 09, 2003, 01:18:38 pm »
You can follow the contuning saga at:

http://people.smu.edu/cmadding/mame/

You can click on the new cabinet photos.

It has been a slow process but I can see faint glow of an arcade at the end of the tunnel. :)
« Last Edit: April 09, 2003, 01:23:20 pm by Chad »
"There are only 10 types of people in the world: Those who understand binary, and those who don't" :thinkgeek.com

paigeoliver

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 10974
  • Awesome face!
Re:Almost done with my first cabinet!!
« Reply #1 on: April 28, 2003, 08:06:25 am »
Nice two tone look. If you happen to have any friends that own a router, then I would suggest getting some t-molding, so you don't bust any wood at the edges. Plus it just looks good.

You could probably also buy t-molding, cut the "T" off, and then just glue it on.
Acceptance of Zen philosophy is marred slightly by the nagging thought that if all things are interconnected, then all things must be in some way involved with Pauly Shore.

  
 

Sitemap 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31