Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns --- Bug Reports --- Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Woodworking Question  (Read 1800 times)

0 Members and 1 Guest are viewing this topic.

Cray

  • Guest
  • Trade Count: (0)
Woodworking Question
« on: July 02, 2002, 09:55:04 pm »
Alright, so I'm making a cabinet, bought the MDF, and then realized, I don't have a surface to cut it on.

I'm thinking of making a cheap table out of a couple sawhorses and a bunch of 2x4's.

Anyone out there have a better idea?
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

SteveJ34

  • Trade Count: (+9)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 806
  • Last login:February 23, 2018, 02:46:08 am
Re: Woodworking Question
« Reply #1 on: July 02, 2002, 10:28:25 pm »
Quote
Alright, so I'm making a cabinet, bought the MDF, and then realized, I don't have a surface to cut it on.

I'm thinking of making a cheap table out of a couple sawhorses and a bunch of 2x4's.

Anyone out there have a better idea?


This is all I used. For the larger pieces, I just used two sawhorses.

At times, a helping hand to keep pieces from crashing to the floor comes in handy.

Steve
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

SirPoonga

  • Puck'em Up
  • Global Moderator
  • Trade Count: (+1)
  • Full Member
  • *****
  • Offline Offline
  • Posts: 8176
  • Last login:September 05, 2017, 09:45:52 am
  • The Bears Still Suck!
Re: Woodworking Question
« Reply #2 on: July 02, 2002, 10:53:16 pm »
my working surface was a couple of horses with an old door on them.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »

jelloslug

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 125
  • Last login:May 25, 2005, 03:55:59 pm
  • Splut!
    • Jelloslugs Arcade
Re: Woodworking Question
« Reply #3 on: July 03, 2002, 07:03:44 am »
That would work great.  Just make sure that the saw horeses and boards don't have and rough spot that would gouge your MDF.
« Last Edit: December 31, 1969, 07:00:00 pm by 1026619200 »