Ok I have a WG D9200 and an ArcadeVGA. I'm having some issues with the display modes. Here's what I've found so far. I'm using the 15-pin connection on the D9200 in case that matters.
Modes that work:
640x480 (pretty much any refresh frequency EXCEPT 60 Hz works) all the way up to 200 Hz.
800x600 Only works in interlaced mode with a frequency of 42Hz (or something really close to that, I'm not in front of the PC right now.)
1024x768 Only works in interlaced mode which is as advertised for the D9200 so probably not an issue.
Any other mode other than the ones listed above produces an "Out of Range" message on my D9200 or is all jittery/blurry. The combination that is really bugging me is that it's unable to do 640x480 and 800x600 at 60 hz (this produces the jittery/blurry picture).
I would say this just must be a limitation of the monitor, but I pulled out an ATI 9700 Pro from the PC that was able to run at several more refresh frwquencies. I'll put it back in tonight or tomorrow and document all setting that work on the 9700 and the ArcadeVGA.
I just wanted to find out if others are experiencing the same thing I'm seeing.
-Zinfari