Just got a 27" bezel, have a question

[needlesmcgirk]

So I just picked up this thing, its a Happs 27" bezel for standard (curved) monitors.  I will be using a 27 inch curved tv as the monitor.  Is this thing going to fit ok or am I going to need to take the casing off the tv?  And how you you guys typically keep these things in place?  thanks so much for your help.

[acevedor2]

Completely depends on the TV.  That said, it should fit with the case on.  As far as retaining them, most people use screws and/or wood strips, since you usually put plexi or glas on top of it.

[bvicarious]

See this thread: http://forum.arcadecontrols.com/index.php?topic=60561.msg599201

[BamBam]

I have a flat screen monitor and was able to resolve the problem by using a router. I secured my bezel to a flat working surface facing up.  I then used a router with a slot cutter and carefully cut the curved surface away, which left me a flat surface to mount against my flat screen monitor.  I lightly sanded the newly cut area until is was smooth.
If your T.V. has a slight curve that does not match your bezel, you will have to create a template of the curve and transfer it to your bezel for trimming.

John