seeburg c or b cabinet measurements needed

[mr_cbf]

Hi Guys

Hopefully someone out there knows of someone who who has a seeburg c or b jukebox. I'm after dimensions so I can build one to create my own jukebox with a touchscreen where the title strips go.

I have pictures of them and know the rough height, width but was after more pictures or exact measures which will make building it easier. If anyone can help out with measurements of all angles it would be appreicated.

Big project I know, but wont be the same thing obviously as not that good, but hoping to mirror there design a little. Thanks again

[Karaokedude]

The B and C you mean the 1936 Symphonola

B   H 51 W 30 1/4 D 21 3/4

C  H 55 W 31 3/4 D 21 3/4

hope this helps

[mr_cbf]

HI mate

Thanks for the above, but actually after the M100 series in the 1950's. Believe 1953 it was made..

If anyone can help out with some details measurements it would be great.

Thanks Mal

[Karaokedude]

M100A 1948-51      55H  41W 29D

M100B  1950-51    54H      34W     28D
     
M100C   1952     54H    35W     26D

all in inches

[Karaokedude]

 nearly all the  post 1950 pre 1960 SeeBurgs are about the same size

theres only an inche difference in most of the dimensions an average  over 40 models is 55H 35W 27D

[mr_cbf]

Excellent, thanks for that mate.... If anyone have one at home and they can do exact measures of side parts and so on would be appreciated. But thanks mate, this will give me the start anyways to what I needed. Cheers

[ScottS]

Why such an obsession with exact measurements? If you build something and find out later that it's off by an inch in some direction or another, are you going to be devastated?

[mr_cbf]

By exact, I'm looking at each part of the actual outside section so I know how round it is etc... If it's out, not at all worried but the more measurements I get the easier it's going to be to cut the wood out, wouldn't you agree?

It's like anything the more info you have the better an end result or hopefully easier the project becomes. Thanks again to those that helped out, appreciated.

[mr_cbf]

Hi All,

I got all the measurements I need. have posted a picture below if anyone wants it also.

Cheers

[fredster]

How are you going to handle the curved glass portion?

[mr_cbf]

Hi Fredster,

Going to go to a local place here in Melbourne to chekc out perspex being bent into that shape. Should be able without any hassle get them to bend standard clear plastic into that shape. I know the high of the glass but will do my own version to fit the frame I build, but will be similar to what is pictured. sorry spoelling is crap, little bit driunk

Cheers Mal