Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: Using an JenShinn from 8liners  (Read 2228 times)

0 Members and 1 Guest are viewing this topic.

Hawkypro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:October 13, 2009, 10:00:27 pm
Using an JenShinn from 8liners
« on: January 11, 2007, 08:04:28 am »
Just want to post a pic. showing the results of using a JenShinn chassis from 8liners. I replaced a Hantarex Polo 25" chassis. A few minor color adjustments still need to be done but, overall im happy with the results with this chassis. ( camera flash affecting the screen a bit.) A positive generic chassis swap.
« Last Edit: January 12, 2007, 12:47:20 pm by Hawkypro »
As you can see Dr. Jones there is nothing you can posses; which i can not take away.

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Using an JenShinn from 8liners
« Reply #1 on: January 11, 2007, 11:47:26 am »
Let's see pix of the chassis installed too.

Hawkypro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:October 13, 2009, 10:00:27 pm
Re: Using an JenShinn from 8liners
« Reply #2 on: January 11, 2007, 01:23:51 pm »
Ken,

I will get a few of the chassis installed too. Ill post them tonight.

« Last Edit: January 12, 2007, 12:58:03 pm by Hawkypro »
As you can see Dr. Jones there is nothing you can posses; which i can not take away.

grantspain

  • I personally prefer "bog trotter"
  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 6177
  • Last login:Today at 03:06:35 am
Re: Using an JenShinn from 8liners
« Reply #3 on: January 11, 2007, 05:22:54 pm »
the screen looks good,like i said before we don't have generic chassis available in the u.k but after seeing another positive chassis swap i will be looking in to this in further detail

Hawkypro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:October 13, 2009, 10:00:27 pm
Re: Using an JenShinn from 8liners
« Reply #4 on: January 12, 2007, 10:12:25 am »
Here is a pic. of the chassis installed.
As you can see Dr. Jones there is nothing you can posses; which i can not take away.

Ken Layton

  • Guru
  • Trade Count: (+1)
  • Full Member
  • ****
  • Offline Offline
  • Posts: 7061
  • Last login:October 12, 2021, 12:25:59 am
  • Technician
Re: Using an JenShinn from 8liners
« Reply #5 on: January 13, 2007, 11:49:02 am »
Did this chassis have a pincushion adjustment on it?

Hawkypro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:October 13, 2009, 10:00:27 pm
Re: Using an JenShinn from 8liners
« Reply #6 on: January 13, 2007, 12:12:07 pm »
Ken,

Yes, it does have a pincushion controll on it. Its located right next to the flyback. The picture I posted shows it. Next to the green cap, just to the right (white color pot). I should have taken a top down picture while i had it out of the chassis frame.
As you can see Dr. Jones there is nothing you can posses; which i can not take away.

albert_c

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 230
  • Last login:April 06, 2010, 03:57:07 pm
Re: Using an JenShinn from 8liners
« Reply #7 on: January 15, 2007, 06:44:00 pm »
How much did that replacement chassis cost you?

Albert

Hawkypro

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 65
  • Last login:October 13, 2009, 10:00:27 pm
Re: Using an JenShinn from 8liners
« Reply #8 on: January 15, 2007, 08:00:32 pm »
kage 8,

The chassis cost me a 100.00 and still working great.

Hawkypro.
« Last Edit: January 15, 2007, 08:04:10 pm by Hawkypro »
As you can see Dr. Jones there is nothing you can posses; which i can not take away.