Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WTB: Marquee Retainer (Two 20" pieces)  (Read 915 times)

0 Members and 1 Guest are viewing this topic.

javeryh

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 7960
  • Last login:Today at 12:38:04 pm
WTB: Marquee Retainer (Two 20" pieces)
« on: November 15, 2006, 11:18:14 am »
Like the one shown here:  http://www.happcontrols.com/amusement/acesor/49100000.htm

I don't need all 10 feet so I was hoping someone had some leftovers they weren't going to use.

Thanks!

Ninten-doh

  • Trade Count: (+4)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 584
  • Last login:March 31, 2017, 10:37:18 am
  • I promise sweetie, this is my last cab purchase
Re: WTB: Marquee Retainer (Two 20" pieces)
« Reply #1 on: November 15, 2006, 11:37:10 am »
Divemaster sells these (see his thread stickied towards the top of the B/S/T section).

Here's his blurb on the retainers:
HAPP MARQUEE RETAINER $.17 a inch I will custom cut on a cnc machine whatever length you need (49-1000-00 30" Marquee Retainer)

He's a really good guy.  I've purchased retainers along with other stuff from him before.

 :cheers:

mlcampbe

  • Trade Count: (0)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 86
  • Last login:December 08, 2022, 10:54:49 am
  • I'm a llama!
Re: WTB: Marquee Retainer (Two 20" pieces)
« Reply #2 on: November 17, 2006, 03:56:18 pm »
I don't know how hung up you are on a true retainer but you can make one pretty cheaply too. Go to home depot/lowes and get a plastic corner protector that is used to protect wall edges. Look in the wallpaper/blinds area to find it. You can paint this stuff and cut to length and it is only a couple of bucks.